Formation of Al3Ti From Mechanically Alloyed Hyper-Peritectic Al-Ti Powder

기계적 합금화법으로 제조된 과포정 Al-Ti 합금에서 Al3Ti 형성에 관한 연구

  • Kim, Hye-Sung (Department of Materials Science and Engineering, Chung-nam National University) ;
  • Suhr, Dong-Soo (Department of Materials Science and Engineering, Chung-nam National University) ;
  • Kim, Gyeung-Ho (Division of Metals, Korea Institute of Science and Technology) ;
  • Kum, Dong-Wha (Division of Metals, Korea Institute of Science and Technology)
  • 김혜성 (충남대학교 재료공학과) ;
  • 서동수 (충남대학교 재료공학과) ;
  • 김긍호 (한국과학기술연구원 금속연구부) ;
  • 금동화 (한국과학기술연구원 금속연구부)
  • Published : 1996.03.31

Abstract

Mechanical alloying is an effective process to finely distribute inert dispersoids in an Al-TM(TM is a transition metal) system. It has been considered that high melting point aluminides are formed by precipitation from supersaturated Al(Ti) powder. This analysis is based on the fact that much higher content of TM than the solubioity can be dissolved in alpha aluminum during the high energy ball milling. Thus, decomposition behavior of Ti in the Al(Ti) was considered very important. But it is confirmed that the higher portion of Ti than Al(Ti) solid solution is existed as nano-sized Ti particles in the MA powders by high energy ball nilling from the XRD spectrum and TEM analysis in this study. Therefore, the role of undissolved TM particles affect the formation of aluminides should be suitably considered. In this study, we present experimental observation on the formation of $Al_3Ti$ fron mechanical alloyed Al-Ti alloys in the hyperperitectic region. This study showed that, in the mechanically alloyed Al-20wt%Ti specimen, intermediate phase of cubic $Al_3Ti$ and tetragonal $Al_{24}Ti_8$ formed at $300{\sim}400^{\circ}C$ and $400{\sim}500^{\circ}C$, respectively, before the MA state reaches to equilibrium at higher temperatures. The formation behavior of $Ll_2-Al_3Ti$ is interpreted by interdiffusion of Al and Ti in solid state based on the fact that large amount of nano-sized Ti particles exist in the milled powder. Present analysis indicated undissolved Ti particles of nanosize should have played an important role initiation the formation of $Al_3Ti$ phase during annealing.

Keywords