DOI QR코드

DOI QR Code

On the post-buckling behaviour of plates under stress gradient

  • Bedair, Osama K. (Department of Civil Engineering, Concordia University)
  • Published : 1996.07.25

Abstract

In this paper the elastic post-buckling behaviour of plates under non-uniform compressive edge stress is investigated. The compatibility differential equations is first solved analytically and then an approximate solution of the equilibrium equation is obtained using the Galerkin method. Explicit expressions are derived for the load-deflection, ultimate strength and membrane stress distributions. Analytical effective width formulations, based on the characteristics of the stress field of the buckled plate, are proposed for this general loading condition. The predicted load-deflection expression is compared with independent test results. Results are also presented detailing the load-deflection behaviour and stress distribution for various aspect ratios.

Keywords

References

  1. Abdel-Sayed, G. (1969), "Effective width of thin plates in compression", ASCE ST10, 95, 2183-2203.
  2. Abdel-Sayed, G. (1969), "Effective width of steel deck plate in bridges", ASCE ST7, 95, 1459-1474.
  3. Bedair, O.K. (1996), "Buckling behaviour of plates partially restrained against rotation under stress gradient", Int. J. Structural Engineering & Mechanics, 4(4), 383-396. https://doi.org/10.12989/sem.1996.4.4.383
  4. Coan, J.M. (1951), "Large deflection theory for plates with small initial curvature loaded in compression", J. Appl. Mech., 18, 143-151.
  5. Dawson, R. G. and Walker, A. C. (1972), "Post buckling of geometrically imperfect panels", ASCE, 98, 75-94.
  6. Galambos, T. V. (1988), Guide to Stability Design Criteria for Metal Structures. 4th ed., Structural Stability Research Council, John Wiley & Sons, New York.
  7. Lind, N.C., Ravindra, M. K. and Schorn, G. (1976), "Empirical effective width formula", ASCE ST.9, 102, 1741-1751.
  8. Margurerre, K. (1937), "The apparent width of the plate in compression", NACA TN. 833.
  9. Narayanan, R. and Chow, F.Y. (1983), "Effective widths of plates loaded uniaxially", Thin Walled Structures, 1, 165-187. https://doi.org/10.1016/0263-8231(83)90019-8
  10. Rhodes, J. and Harvey, J. M. (1977), "Examination of plate post-buckling behaviour", J. Engrg. Mech., ASCE, 103, 461-478.
  11. Sherbourne, A. N. and Bedair, O. K. (1993), "Plate/stiffener assemblies in uniform axial compression: Part II-Post-Buckling analysis", J. Engrg. Mech., ASCE, 119, 1956-1972. https://doi.org/10.1061/(ASCE)0733-9399(1993)119:10(1956)
  12. Usami, T. (1982), "Post-buckling of plates in compression and bending", ASCE ST3, 108, 591-609.
  13. Vilnay, O. and Rockey, K. C. (1981), "A generalized effective width method for plates loaded in compression", Journal of Constructional Steel Research, 1, 3-12. https://doi.org/10.1016/0143-974X(81)90002-X
  14. Von-Karman, T., Sechler, E. E., and Donnell, L. H. (1932), "The strength of thin plates in compression", Transaction, ASME, 54, 53-57.
  15. Walker, A.C. (1968), "Maximum loads for eccentrically loaded thin-walled channel struts", IABSE, 28, 169-181.
  16. Walker, A.C., (1967), "Flat rectangular plates subjected to a linearly-varying edge compressive loading", Thin Walled Structures, A. H. Chilver, ed., Chatto & Windus. England 208-247.
  17. Walker, A. C., (1966), "Local instability in plates and channel struts", ASCE ST3, 92, 39-55.
  18. Winter, G. (1968), "Thin-walled structures, theoretical solutions and test results, Preliminary publication of the eight congress, IABSE, 101-112.
  19. Winter, G. (1947), "Strength of thin steel compression flanges", Transactions, ASCE, 112, 527-576.
  20. Yamaki, N. (1959), "Post-buckling behaviour of rectangular plates with small initial curvatures loaded in edge compression", J. Appl. Mech., 27, 407-414.
  21. Yamaki, N. (1960), "Post-buckling behaviour of rectangular plates with small initial curvatures loaded in edge compression, Continued", J. Appl. Mech., 27, 335-342. https://doi.org/10.1115/1.3643962

Cited by

  1. Experimental investigation of dynamic post-buckling characteristics of rectangular plates under fluid-solid slamming vol.22, pp.8, 2000, https://doi.org/10.1016/S0141-0296(99)00042-5
  2. Effect of lateral restraint on the buckling behaviour of plates under non-uniform edge compression vol.5, pp.1, 1996, https://doi.org/10.12989/sem.1997.5.1.085