Journal of Surface Science and Engineering (한국표면공학회지)

The Korean Institute of Surface Engineering (한국표면공학회)
권호 표지

STUDIES ON THE HIGH TEMPERATURE PROPERTIES OF DUPLEX-TREATED AISI H13 STEEL

  • Chung, J.W. (Plasma Applied Materials Laboratory, Dept. of Mater. Eng. Hankuk Aviation University) ;
  • Lee, S.Y. (Plasma Applied Materials Laboratory, Dept. of Mater. Eng. Hankuk Aviation University) ;
  • Kim, C.W. (Plasma Applied Materials Laboratory, Dept. of Metall. Eng., Sungkyunkwan University) ;
  • Kim, S.S. (Plasma Applied Materials Laboratory, Dept. of Metall. Eng., Sungkyunkwan University) ;
  • Han, J.G. (Plasma Applied Materials Laboratory, Dept. of Metall. Eng., Sungkyunkwan University) ;
  • Lee, S.Y. (Mater. Forming Group, Korea Inst. of Mach. and Metals)
  • Published : 1996.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

In oder to improve the wear resistance as well as oxidation resistance at high temperature a AISI H13 steel was treated by a duplex process of calorizing followed by plasma nitriding. The surface properties of the duplex-treated AISI H13 steel was characterized and compared with those treated by single surface process of calorizing and plasma nitriding, in terms of microstruture, microhardness, wear resistance at $500^{\circ}C$, and the oxidation behaviours at $700^{\circ}C$, Duplex process on H13 steel had created duplex layer of approximately $190\mu\textrm{m}$ on the surface, and surface microhardness was measured to be above 1450Hv(0.1Kgf). There was considerable improvement of the high temperature wear resistance at $500^{\circ}C$ in the duplex-treated steel when both wear volume and weight change due to oxidation were considered. In addition the duplex-treated steel showed an improved high temperature oxidation resistance than the plasma nitrided steel at $700^{\circ}C$.

Keywords