한국안전학회지 (Journal of the Korean Society of Safety)
- 제11권4호
- /
- Pages.29-33
- /
- 1996
- /
- 1738-3803(pISSN)
- /
- 2383-9953(eISSN)
UT와 RT에서의 용접부 결함 검출 비교에 관한 연구
A Study on Comparison of UT with RT for the Detection of Defects in Weldzone
초록
In this study, specimens were prepared which have some defects on the buttweld joint of mild steel. In order to detect the defects of specimens, the following tests were put to : AUT and RT. When the results of the three tests were compared, the conclusion could be brought to as follows. 1) AUT outstrips RT in the abillity to detect plane defects like slags or cracks, but RT excels AUT in the ability to detect spheroidal defects like blowholes. 2) RT detects neither taper cracks nor very closed cracks, whereas AUT detects both of them. 3) AUT can detect at once plane defects like cracks and spheroidal defects like blowholes.
키워드