참고문헌
- SAE paper 740715 Fuel Droplet Size Distribution in Diesel Combution Chamber Hiroyasu, H.;Kadota, T
- SAE paper 790494 On the Dependence of Spray Angle and Other Spray Parameters on Nozzle Design and Operating Conditinos Reitz, R. D.;Bracco, F. B.
- Proceedings Institution of Mechanical Engineerings v.173 no.25 Flow Pattern in Diesel Nozzle Spray Holes Bergwerk, W
- Ph. D. Thesis Atomizing Round Jets Wu, K-J
- Journal of Mechanical Engineering Science v.7 no.2 Discharge Coefficient for Incompressible Non-Cavitating Flow Through Long Orifice Licharowicz, A;Duggins, R. K.;Markaland, E
- ASME FED v.178/HTD;270 An Experimental Study of Turbulent Orifice Flows including Cavitatino Effects He, L.;Ruiz, F
- MS Thesis, Purdue Univ. The Effect of Internal Geometry and Injection Pressure on the Flow and Spray Characteristics of a Plain Orifice Atomizer Ohrn, T. R
- Ph. D. Thesis, University of Wisconsin-Madison Turbulent Flow in a Scale Model of A Disel Fuel Injector Nozzle Hole Andrea, J. K.
- Combustion Science and Technology v.30 no.1 Nozzle Exit Flow Characteristics for Squarededged and Rounded Inlet Geometry Kent, J. C.;Brown, G. M.
- JSME v.56 no.528 Disintegrating Progress of a Liquid Jet and Internal Flow in a Nozzle Shimizu, M.;Arai, M.;Hiroyasu, H
- Atomization and Spray v.5 no.1 Near Nozzle Characteristics of a Transient Fuel Spray Koo, J. Y.;Martin, J. K.
- Principles and Practice of Leser-Doppler Anemometry Durst, F.;Melling, A.;Whitelaw, J. H.
- Phys. Fluid v.22 no.6 Ultra High Speed Filming of Atomizing Jets Reitz, R. D.;Bracco, F. V.
- Sanderson in Fig.5; adapted from referne 5