DOI QR코드

DOI QR Code

섬유강화복합재의 Tribological 특성에 관한 연구

Tribological Characteristics of Fiber-Reinforced Plastics(FRP)

  • 성인하 (연세대학교 기계공학과 대학원) ;
  • 여인완 (연세대학교 기계공학과 대학원) ;
  • 김대은 (연세대학교 기계공학과)
  • 발행 : 1996.03.01

초록

Experimental investigation on the tribological behavior of fiber-reinforced plastics(FRP) has been studied. It is shown that the frictional behavior of carbon FRP depends on the fiber-orientation while glass FRP does not. The friction coefficient values for carbon FRP were about 0.8, 0.3, and 0.2 for normal, 45$^{\circ}$ and 0$^{\circ}$ sliding directions respectively. Also, the applied load was found to affect the friction coefficient. In the case of this work, 50 gf resulted in the highest value while 200 gf resulted in the lowest value. The friction coefficients for higher loads fell in between the two extreme values.

키워드

참고문헌

  1. Analysis and Performance of Fiber composites Bhagwan D. Agarwal(et al.)
  2. Microstructural design of Fiber Composites Tsu-Wei Chou
  3. Metal-filled Polymers S. K. Bhatiacharya
  4. Microstructure and Wear of Materials Karl-Heinz Zum Gahr
  5. Friction and Wear of Polymer Composites Klaus Friedrich
  6. 한국재료학회지 v.4 no.7 섬유보강 복합재의 마찰 및 마모특성 주혁종(외 3명)
  7. 한국재료학회지 v.3 no.3 탄소/탄소 복합재료의 마모특성에 대한 탄소섬유 길이의 영향 하헌승(외 4명)
  8. Tribology of Miniature Systems Zygmunt Rymuza
  9. Tribophysics N. P. Suh
  10. Friction and wear A.D. Sarkar