Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지

Effects of Titania Whisker Precipitation on Wear Property of the Glass-Ceramic

타이타니아 단섬유상의 석출이 결정화유리의 마모특성에 미치는 영향

  • 이경호 (순천향대학교 재료공학과)
  • Published : 1996.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

In Li0.4Ca0.05AlP0.5Si0.75O4.5 composition glass, glass-ceramic having a near 100% crystallinity after nucleation heat treatment of 74$0^{\circ}C$/2 h and crystallization heat treatment of 90$0^{\circ}C$/2 h and in-situ TiO2 whisker reinforced glass-ceramic after heat treatment of 105$0^{\circ}C$ for 20 h were fabricated with the addition of 4% TiO2 as a nucleating agent. With these materials a ball-on-disc type wear test was conducted in order to examine the effect of TiO2 whisker prepcipitation on ambient and high temperature wear properties of the glass-ceramic. Wear test results indicated that all specimens exhibited micro-fracture wear mechanism in ambient temperature. As temperature increased the wear rates of the materials were increased. However the in-situ TiO2 whisker reinforced glass-ceramic exhibited the lowest wear rate over the test temperature range. This resulted from the improvement of harness and fracture toughness of the material as the glass converted into the glass-ceramic followed by precipitation of TiO2 whiskers throughout the glass-ceramic matrix.

Keywords

References

  1. Comm. An. Ceram. Soc. v.67 no.12 Toughening Behavior in SiC-Whisker-Reinforced Alumina P.F. Becher;G.C. Wei
  2. Am. Ceram. Soc. v.64 no.2 Development of SiC-Whisker-Reinforced Ceramics G.C. Wei;P.F. Becher
  3. Tailoring Multiphase and Composite Ceramics Whisker Reinforced Ceramic Composites T.N. Tieg;P.F. Becher;R.E. Newnham(ed.);G.L. Messing(ed.);C.G. Pantano(ed.);R.E. Tressler(ed.)
  4. Micromechanical Materials Modeling v.2 Micro-Models for Composite Materials-Particulate and Discontinuous Fiber Composites R.L. McCullough;J.M. Whitney(ed.);R.L. McCullough(ed.)
  5. J. Am. Ceram. Soc. v.74 no.10 Rising Crack-Growth-Resistance (R-Curve)Behavior of Toughened Alumina and Silicon Nitride N. Ramachandran;D.K. Shetty
  6. Ceram. Eng. Sci. Proc. v.10 no.7-8 Super-Tough Silicon Nitride with R-Curve Behavior C.W. Li;J. Yamanis
  7. J. Am. Ceram. Soc. v.75 no.7 R-Curve Behavior and Strength for In-Situ Reinforced Silicon Nitrides with Different Microstructures C.W. Li;D.J. Lee;S.C. Lui
  8. High-Performance Glasses Glass Ceramics P.F. James;R.W. Jones;M. Cable(ed.);J.M. Parker(ed.)
  9. Advances Nucleation and Crystallization in Glasses Nucleation and Crystallization of Li₂O-2SiO₂ Glass-A DTA Study A. Marrotta;A. Buri;F. Branda;S. Saiello
  10. Fracture of Brittle Solids B.R. Lawn
  11. Acta. Metal. v.24 Quasi-Static Solid Particle Damage in Brittle Solids, I. Obseravation, Analysis, and Implications A.G. Evans;T.R. Wilshaw
  12. Fundamentals of Friction and Wear Materials Wear Mechanisms in Ceramics A.G. Evans;B.D. Marshall;D.A. Rigney(ed.)
  13. What Every Engineer Should Know About Ceramics S. Musikant
  14. J. Kor. Ceram. Soc. Effects of Impurities in Grain Boundary Glass Phase on Tribological Behaviors of Si₃N₄ Y.S. Oh;D.S. Lim;K.H. Lee
  15. Friction and Wear of Ceramics A Review of the Lubrication of Ceramics with Thin Solid Film A. Erdemir;S. Jahanmir(ed.)