The Korean Journal of Ceramics

The Korean Ceramic Society (한국세라믹학회)
권호 표지

Spectroscopic and Microstructural Analysis of Phase Transformation of Mg-PSZ/$Al_2O_3$ Fibers Prepared by Sol-Gel Method

  • Eun, Hee-Tai (Dept. of Ceramic Eng., and Center for Molecular Dynamics, Inha Univ) ;
  • Whang, Chin-Myung (Dept. of Ceramic Eng., and Center for Molecular Dynamics, Inha Univ)
  • Published : 1996.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

The Mg-PSZ/$Al_2O_3$ fibers were fabricated by the sol-gel method. The added $Al_2O_3$ amounts were varied from 5 to 20 mol%. The phase transformation studies of a drawn Mg-PSZ/$Al_2O_3$ fibers were investigated by use of X-ray diffraction, IR and Raman spectroscopy. Microstructure and tensile strength of fibers were subjected to scanning electron microscopy and tensile strength tester. When $Al_2O_3$ was added to the Mg-PSZ fibers, it was found out from the analysis of XRD patterns and Raman spectra that a small amount of crystalline spinel($MgAl_2O_4$) started to form due to the reaction between $Al_2O_3$ and MgO, at $1000^{\circ}C$, and the phase transformation temperature of $ZrO_2$ crystal phase at different sintering temperatures increased. Also, the rapid grain growth with average size of 2.0 ${\mu}m$ shown in Mg-PSZ fiber at $1500^{\circ}C$ was considerably suppressed to 0.39 ${\mu}m$ by adding $Al_2O_3$ at the same temperature. When the Mg-PSZ/$Al_2O_3$ fibers containing 5 mol% $Al_2O_3$ were sintered $800^{\circ}C$ for 1 hr, average tensile strength of fibers was 0.9 GPs at diameters of 20 to 30 ${\mu}m$, but as the sintering temperatures was increased to $1000^{\circ}C$ for 1 hr, average tensile strength of fibers increased to 1.2 GPa in the same diameter range.

Keywords

References

  1. J. Am. Ceram. Soc. Bull. v.70 no.4 Hydrolysis Method for Preparing Zirconia Fibers C. Sakurai;T. Fukui;M. Okuyama
  2. Ultrastructural Processing of Ceramics, Glasses and Composites Fabrication of Zirconia Fibers from Sol-Gel E. Leory;C. Robin-Brosse;J. P. Torre;L. L. Hench(ed.);D. R. Ulrich(ed.)
  3. J. Non-Cryst. Solids v.56 Preparation of Amorphous ZrO₂ Fibers by Unidirectional Freezing of Gel M. Kokubo;Y. Teranish;T. Maki
  4. Yogyo Kyokai-Shi v.92 no.12 Preparation of Fibrous ZrO₂ and CaO-ZrO₂ from Zirconium Alkoxide by Sol-Gel Method K. Kamiya;T. Yoko;K. Tanaka;H. Itoh
  5. Zirconia'88 Structure of Stabilized Zirconium Dioxide Fibers I. N. Yermolenko;T. M. Ulyanova;P. A. Vityaz;I. L. Fyodorova;S. Meriani(ed.);C. Palmonari(ed.)
  6. J. Korean Ceram. Soc. v.27 no.6 ZrO₂ Ceramic Fiber Fabrication by Sol-Gel Processing S. Kim;S. S. Kim;W. C. LaCource
  7. J. Eur. Ceram. Soc. v.7 Sol-Gel Derived CaO- and $CeO_2-Stabilized\;ZrO_2$ Fibers-Conversion Process of Gel to Oxide and Tensil Strength K. Kamiya;K. Takahashi;T. Maeda;H. Nasu;T. Yoko
  8. J. Korean Ceram. Soc. v.31 no.10 Preparation of MgO-ZrO₂ Fibers by Sol-Gel Method and Their Characterization C. M. Whang;H. T. Eun
  9. J. Mater. Sci. v.28 Synthesis of Polycrystalline Alumina-Zirconia Fiber Using Chelated Aluminum-Zirconium Precursor T. Yogo;S. Kodame;H. Iwahara
  10. Ceram. Eng. Sci. Pro. v.11 no.9;10 Preparation of Mullite-Based Fibers by Sol-Gel Processing K. R. Venkatacharl;L. T. Moeti;M. D. Sacks;J. H. Simmons
  11. J. Am. Ceram. Soc. v.68 no.2 High-Temperature Strength and Fracture Toughness of $Y_2O_3$-Partially-Stabilized $ZrO_2/Al_2O_3$ Composites K. Tsukuma;K. Ueda;K.Matsushita;M. Shimada
  12. Advanced Structural Ceramics Mechanical Property and Microstructure of TZP and TZP/$Al_2O_3$ Composites K. Tsukuma;T. Takahata;P.F. Becher(ed.);M.W. Swain(ed.);S. Somiya(ed.)
  13. Ceram. Eng. Sci. Proc. v.11 no.9;10 Processing and Microstructure of Y-TZP/$Al_2O_3$ Fiber S. Sim;A. Morrane;D. E. Clark
  14. Advances in Ceramics, in Science and Technology of Zirconia Ⅱ Diffusion Processes and Solid-State Reaction in the Systems $Al_2O_3-ZrO_2$ (Stabilizing Oxide)($Y_2O_3$, CaO, MgO) T. Kosmac;D. Kolar;M. Trontelj;N. Claussen(ed.);M. Ruhle(ed.);A.H. Heuer(ed.)
  15. J. Mater. Sci. v.23 Preparation and Thermal Evolution of Sol-Gel Derived Transparent ZrO₂ and MgO-ZrO₂ Gel Monolith P. Kundul;D. Pal;Suchitra Sen
  16. J. Mater. Sci. v.22 Phase Transformations of Gel-Derived Magnesia Partially Stabilized Zirconias T. Y. Tseng;C. C. Lin;J. T. Liaw
  17. J. Am. Ceram. Soc. v.57 no.1 Raman Scattering Study of the Crystallization and Phase Transformations of ZrO₂ V. G. Keramidas;W. B. White
  18. J. Am. Ceram. Soc. v.54 no.5 Infrared and Raman Spectra of Zirconia Polymorphs C. M. Phillippi;K. S. Mazdiyasni
  19. J. Am. Ceram. Soc. v.55 no.2 Lineal Intercept Technique for Measuring Grain Size in Two-Phase Polycrystalline Ceramics J. C. Wurst;J. A. Nelson
  20. J. Mater. Sci. v.17 Transformation Toughening F. F. Lange