Journal of Powder Materials (한국분말재료학회지)

The Korean Powder Metallurgy & Materials Institute (한국분말재료학회 (*구 분말야금학회))
권호 표지

Sintering Behavior of Ball Milled ${MoSi}_{2}$ Powders

볼밀링한 ${MoSi}_{2}$ 분말의 소결거동

  • 이승익 (한양대학교 재료공학과)
  • Published : 1996.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

The effect of ball milling on the pressureless sintering of MoSi$_2$ was investigated. Ball milling was conducted at 70 rpm for 72 hours using different balls and vessels: one used tungsten carbide balls in a plastic vessel(referred as B-powder) and the other stainless steel ball in a stainless steel vessel(referred as C- powder). The powder was compacted with 173MPa and subsequently sintered at the temperature range of 1150 $^{\circ}C$ and 1450 $^{\circ}C$ in H$_2$, atmosphere. Sintered density was measured and scanning electron micrograph was observed. Over 90% of the theoretical density was attained at 1250 $^{\circ}C$ within 10 minutes for C-powders, while the similar densification required a sintering temperature of 1450 $^{\circ}C$ for B-powders. Such a difference in sinterability between B and C-powders was discussed in terms of the effect of particle size reduction and activated sintering caused by Ni and/or Fe introduced during ball milling.

Keywords

References

  1. Mat. Sci. and Eng. v.A155 A. K. Vasudevan;J. J. Petrovic
  2. J. Mat. Sci. v.29 Y. L. Jeng;E. J. Lavernia
  3. Mat. Res. Symp. Proc. v.322 C. E. Ramberg;P. Beatrice;K. Kurokawa;W. L. Worrell
  4. Mat. Sci. and Eng. v.A192;A193 J. J. Petrovic
  5. J. Am. Ceram. Soc. v.75 R. K. Wade;J. J. Petrovic
  6. J. Am. Ceram. Soc. v.75 R. K. Wade;J. J. Petrovic
  7. Mat. Sci. and Eng. v.A155 R. Gibala;A. K. Ghosh;D. C. Van;Aken, D. J.;Srolovitz;A. Basu;H. Chang;D. P. Mason;W. Yang
  8. 대한금속학회지 v.33 박형상;신광선
  9. Metall. Mater. v.29 A. Costa e Silva;M. J. Kaufman
  10. Mat. Res. Soc. Proc. v.322 S. E. Riddle;S. Jayashankar;M. J. Kaufiman
  11. High Temp. High Press. v.2 K.. Zeitsch;E. Fitzer
  12. Mat. Sci. and Eng. v.A155 S. Bose
  13. Mat. Sci. and Eng. v.A155 J. J. Petrovic;A. K. Bhattacharya;R. E. Honnell;T. E. Mitchell;R. K. Wade;K. J. McClellan
  14. 대한금속학회지 v.33 조성원;이기옥;문종태;김용석
  15. Mat. Res. Soc. Proc. v.322 J. J. Petrovic;J. S. Idasetima
  16. The Metallurgy of Doped/Non-sag Tungsten H. Yamamoto(Ed.);E. Pink(Ed.);L. Bartha(Ed.)
  17. Metall. Mater. Trans. A v.26A M. K. Yoo;Y. Hiraoka;J. Choi
  18. Metall. Mater. Trans. A v.7 R. M. German;Z. A. Munir
  19. Scr. Metall. v.21 J. S. Lee;I. H. Moon
  20. 대한금속학회지 v.31 유명기;박종구;최주
  21. J. Less-Common Metals v.12 I. J. Toth;N. A. Lockington
  22. J. Inst. Met. v.75 W. H. Hall
  23. Acta Metall. Mater. v.38 Y. Umakoshi;T. Sakagami;T. Hirano;T. Yamane
  24. Soc. Powder Metall. v.7 V. V. Panichkina;V. V. Skorokhod;A. F. Khrienko
  25. J. Am. Ccram. Soc. v.75 J. D. Hansen;R. P. Rusin;M-H. Teng;D. L. Johnson
  26. Mat. Sci. and Eng. v.A155 K. Sadananda;C. R. Feng;H. Jones;J. J. Petrovic
  27. Trans. AIME v.230 R. W. Bartlett;P. R. Gage;P. A. Larsscn
  28. High-Temperature Oxidation of Metals P. Kofstad
  29. School of Mater. Engr. MIAC Report 2, Refractory Metal Disilicides Research K. J. Bowman
  30. Smithells Metal Reference Book(7th ed.) E. A. Brandes;G. B. Brook
  31. Int. J. Powder Mctall. Powder Tech. v.18 R. M. German;C. A. Labombard
  32. Thin Solid Films v.199 R. S. Rastogi;V. D. Vankar;K. L. Chopra
  33. Thin Solid Films v.206 R. S. Rastogi;V. D. Vankar;K. L. Chopra