DOI QR코드

DOI QR Code

A Study on the Mechanical Properties of EMC and Thermal Stress Anlaysis in Electronic Packagings

전자패키지용 EMC의 기계적 성질 및 패키지내의 열응력해석

  • Shin, Dong-Kil (Dept. of Mechanical Engineering, Korea Advanced Institute of Science and Technology) ;
  • Lee, Jung-Ju (Dept. of Mechanical Engineering, Korea Advanced Institute of Science and Technology)
  • 신동길 (한국과학기술원 기계공학과) ;
  • 이정주 (한국과학기술원 기계공학과)
  • Published : 1996.11.01

Abstract

In this study, as a part of basic study for developing the simulation program for the assemssment of reliability of electronic EMC packaging which covers from EMC mixing step to thermal analysis, comparison between a measured and predicted values of material properties of EMC and finitde element analysis of thermal stress are performed. For the experimental testing specimens of fifty, sixty hive and eighty percent filler($13\mu m$, spherical silica) weight fraction are fabricated using tranfer molding. Coefficient of thermal expansion, elastic modulus and thermla conductivity are measured using these specimens and then these measured values are compared with the predicted values by various equations ( such as dilute suspension method. self consistent method, generalized self consistent method, Hashin-Shtrikman's bounds. Shapery's bounds, Nielsen's method and others). Measured values are distributed within the upper and lower bounds of equations. Measured elastic modulus and coefficient of thermal expansion approaches closely the perdicted values with self consisten mehtod and upper bound of Shaperys equation respectively. However small differences of thermal conductivity between the different filler volume fraction are obserbed. FEM analysis indicates that firstly stress is concentrated at the corner section of EMC and secondly EMC with eighty percent filler weight fraction shows less thermal stress when package is cooling down and relatively high thermal stress when package is heating up.

Keywords