Gravity Survey of the Subsurface Geology and Geologic Structure between Samcheog and Taebaek Area

중력탐사에 의한 삼척-태백간의 지하지질 및 지질구조 연구

  • Min, Kyung Duck (Department of Geology, Yonsei University) ;
  • Cho, Kwang Eun (Geospace R&D Team, Technology & Engineering Institute, Youone Engineering & Construction)
  • 민경덕 (연세대학교 지질학과) ;
  • 조광은 (유원건설 기술연구소 지하공간팀)
  • Received : 1994.12.15
  • Published : 1995.02.28

Abstract

The gravity measurment has been carried out at 48 gravity stations with intervals of 1.0~1.5 km along the survey line between Samcheog, Gosari and Taebaek to study subsurface geology and geologic structure in the northeastern part of the Ockchon zone. The Bouguer gravity anomaly values were obtained from the measured gravity values through the gravity corrections. The subsurface geology and geologic structure were interpreted quantitatively by means of the Fourier series method and Talwani method for 2.5 dimensional body. In the study area, the depth of Conrad discontinuity is about 10 km at Samcheog, northeastern end of the survey line, and it is increased rapidly to about 12.5 km at Miro, 15 km at Gosari and 15.5 km at Dongjeom, southwestern end of the survey line, respectively. The depth of the basement of the Ockchon zone exposed at Samcheog is increased smoothly to about 2 km at 5 km from Samcheog along the survey line, and is exposed again in the area between Singiry and Gosari. Beyond Gosari its depth is increased to about 1.7 km, and displaced 2.3 km downward by Osipcheon fault near Dogyeri and 0.5 km by Baeksan thrust near Cheolam, respectively. Many V-shaped low Bouguer gravity anomalies resulted from the fracture zone associated with faults imply the existence of Osipcheon fault and several inferred faults. The low Bouguer gravity anomaly zone between Tongdong and Dongjeom is caused by Jurassic gneissose granite. A local high Bouguer gravity anomaly at 35 km along the survey line from Samcheog is interpreted by the effect of iron deposit of high density existed at subsurface. The thickness of Great Limestone Group varies from 0.5 km to 1.4 km, that of Pyeongan Supergroup from 0.4 km to 0.9 km, and that of Yangdeog Group is about 0.3 km. The thickness of Jurassic gneissose granite varies from 1.5 to 3.0 km.

Keywords

Acknowledgement

Supported by : 연세대학교