An Analysis Finite Element for Element for Elasto-Plastic Thermal Stresses Considerating Strain Hysteresis at Quenching Process of Carbon Steel (I) - Analysis of temperature distribution -

탄소강의 담금질 처리과정에서 변형율이력을 고려한 탄소성열응력의 유한요소 해석(I) - 온도분포의 해석 -

  • Kim, Ok-Sam (Dept. of Mechanical Engineering, Yosu National Fisheries University) ;
  • Cho, Eui-Il (Dept. of Mechanical Engineering, Yosu National Fisheries University) ;
  • Koo, Bon-Kwon (Dept. of Die and Mould Design, Seoul National Polytechnic University)
  • 김옥삼 (여수수산대학교 기계공학과) ;
  • 조의일 (여수수산대학교 기계공학과) ;
  • 구본권 (서울산업대학교 금형설계학과)
  • Published : 1995.09.30

Abstract

Temperature distribution, transformation and residual stresses generated during the quenching process of carbon steel. It follows many difficulties in the analytical considerations on those quenching process because of the coupling effects on temperature and metallic structures. In this paper one of the basic study on the quenching stresses was carried out for the case of the round steel bar specimen(SM45C) with 40mm both in its diameter and length. The temperature distributions considering strain hysteresis were numerically calculated by finite element technique. In calculating the transient temperature field, the heat flux between water and rod surface was determined from the heat transfer coefficient. The gradient of temperature is almost same to geometric of specimen. At early stage of the quenching process, the abrupt temperature gradient has been shown in the surface of the specimen.

Keywords