초록
절리암반내에서 이루어지는 주입재의 유동을 분석하기 위하여 서의 주입재 유동에 대한 전산실험을 수행하였다. 암반내 유체유 주입재의 전단강도와 점성도변화 특성을 반영하였다. 다양한 문제 극분포 발생장치 및 절리망 형성장치와의 연계성을 확보하였다. 주입재와 절리면과의 마찰에 의한 수두손실을 계산하기 위하였으며 주입재의 고화에 따른 유동멈춤현상을 반영하기 위하여다. Binghamian grout(이후 Bingham 주입재)와 Newtonian grout(이후 Nweton 주입재)의 유동특성에 관한 자료를 구하기 위하여 실험실 시험결과를 수식화하였다. 단일절리면에서의 주입재 유동특성에 대한 전산실험을 수행한 결과 평판모델에서는 발견할 수 없는 주입재의 채널유동을 확인할 수 있었다. 전단강도 및 점성도의 변화가 주입재 유동에 미치는 영향을 파악하여 주입관리와 주입재 선정을 위한 기본방안을 제시할 수 있었다. 또한 지하수의 유동이 주입재 유동에 미치는 영향을 분석하여 주입지역에 작용하는 수리구배와 주입압과의 관계를 도출하였다. 마지막으로 터널주변에서의 주입재 유동을 관찰하여 주입작업에 대한 이해를 증진시키고자 하였다.
To study the grout flow in jointed rock, various nurser characteristics of grout in a single joint plane and two-dperorbed. The joint plane is described as a channel nets properties of grout are considered. To deal with various prob generator and i oint network generator are used. A loss of head due to friction in laminal flow is adopted to between the grout and joint wall. The grout flow is stopped, setting time. To consider this phenomenon, the idea of maxim From the results of numerical simulation on the single jai etration of grout is confirmed. The basic principles for the ation and the selection of the grout are presented. Correlation ant and grouting pressure is defined by analyzing the effects grout flow. Finally, the grout flow around a tunnel is simulate ins grouting operation for jointed rock mass.