Monitoring System for Abnormal Cutting States in the Drilling Operation using Motor Current

모터전류를 이용한 드릴가공에서의 절삭이상상태 감시 시스템

  • Kim, H.Y. ;
  • Ahn, J.H.
  • 김화영 (부산대학교 대학원 정밀기계공학과) ;
  • 안중환 (부산대학교 정밀기계공학과, 정밀정형 및 금형가공 연구 센터)
  • Published : 1995.05.01

Abstract

The in-process detection of drill wear and breakage is one of the most importnat technical problems in unmaned machining system. In this paper, the monitoring system is developed to monitor abnormal drilling states such as drill breakage, drill wear and unstable cutting using motor current. Drill breakage is detected by level monitoring. Tool wear is classified by fuzzy pattern recognition. The key feature for classification of tool wear is the estimated flank wear which is calculated by the proposed flank wear model. The characteristic of the model is not sensitive to the variation of cutting conditions but is sensitive to drill wear state. Unstable cutting states due to the unsmooth chip disposal and the overload are monitored by the variance/mean ratio of spindle motor current. Variance/mean ratio also includes the information about the prediction of drill wear and drill breakage. The evaluation experiments have shown that the developed system works very well.

Keywords