참고문헌
- Nature v.258 Ceramic Steel? R.C. Garvie;R.H. Hannink;R.T. Pascoe
- J. Mater. Sci. v.13 Effect of Stress Induced Phase Transformation on the Properties of Polycrystalline Zirconia Containing Metastable Tetragonal Phase T.K. Gupta;F.F. Lange;J.H. Bechtold
- Am. Ceram. Soc. Bull. v.65 no.10 Zirconia: Ceramic Engineering's Toughness Challenge G. Fisher
- J. Am. Ceram. Soc. v.69 Transformation of Yttria Doped Tetragonal ZrO₂Polycrystals by Annealing in Water T. Sato;M. Shimada
- J. Am. Ceram. Soc v.69 no.7 Significance of Internal Stresses for the Martensitic Transformation in Yttria-Stabilized Tetragonal Zirconia Polycrystals during Degradation S. Schmauder;H. Schuubert
- Yogyo Kyokaishi v.96 no.3 The Effects of High Temperature and High Pressure Water on the Low Temperature Degradation Behavior of Y-TZP M. Yoshimura
- Ceram. Eng. Sci. Proc. v.10 no.7-8 A Model for Structural Degradation of Y-TZP Ceramics in Humid Atmosphere T.T. Lepisto;T.A. Mantyra
- J. Mater Sci. Lett v.4 no.7 Thermal Stability of Y₂O₃-Partially Stabilized Zirconia (Y-TZP) and Y-PSZ/Al₂O₃ Composites K. Tsukuma;M. Shimada
- Proc. Brit. Ceram. Soc. v.34 Surface Stabilization of Y-TZP H. Schubert;N. Claussen;M. Ruhle
- J. Mater. Res. v.5 no.3 Homogeneous Fabrication and Densification of Zirconia-toughened Alumina(ZTA) Composite by the Surface-induced Coating H.M. Jang;J.H. Moon
- J. Mater. Res v.23 Mechanical Properties and Microstructures of Co-precipritation Derived Tetragonal Y₂O₃-ZrO₃-Al₂O₃Composites S. Rajendran;M.V. Swain;H.J. Rossell
- J. Am. Ceram. Soc. v.74 no.2 Effect of Alumina Addition on the Tetragonal to Monoclinic Phase Transformation in Zriconia-3 mol% Yttria H. Tsubakino.;R. Nozato
- J. Korean Cerm. Soc. v.28 no.1 Preparation of Alumina by the Sol-Gel Process(I)-Characteristics of Polymeric Alumina Sol H.W. Lee;G.D. Kim;H.J. Jung;C.E. Kim
- J. Mater. Sci. v.20 Dispersion of Oxide Powders in Organic Liquide M.V. Parish;R.R. Garcia;H.K. Bowen
- Advanced in Ceramics v.21 Effect of Physical, Chemical, and Kinetic Factors on Ceramic Sintering M.F. Yan