초음파 분무 열분해법에 의한 ZnO 합성의 이론과 실제

Theory and practice of synthesized ZnO powders by ultrasonic spray pyrolysis method

  • 서수형 (강원대학교 재료공학과) ;
  • 신건철 (강원대학교 재료공학과)
  • 발행 : 1995.02.01

초록

초음파 분무기에 의해 분무된 질산아연 염($Zn(NO_3)_2$) 용액(0.5M)의 에어로졸 거동과 분포에 대한 실제 실험 결과는 computer simulation 결과와 일치하였다. 즉, 반응관(thermophoresis)에 의해 반응관 중심부로 이동하였다. 또한 에어로졸의 농도 분포는 축길이가 증가함에 따라 반응관 중심쪽에 높았다. 합성된 ZnO 입자 중에서 반응과 중심에서는 볼 수 없었던 깨진 형태의 shell-like aggregates가 반응관 벽근처에서 관찰되었으며, 입자의 크기는 반응관 벽쪽($ 1.2 {\mu\textrm{m}$)이 중심쪽($0.9 {\mu\textrm{m}$)보다 컸다.

Abstract The experimental results which is the aerosols behavior and distribution of atomized zinc nitrate ($Zn(NO_3)_2$) solution (0.5 M) by ultrasonic vibrator were in accord with the computer simulations. i.e., most aerosols passing through the reactor (hot zone) moved toward the center of reactor by thermophoresis as the axis of reactor increase. Also, the distribution of aerosols concentration was high at the center of reactor as the axis increase. Among the synthesized ZnO particles, shell-like aggregates of fracture type which could not see at the center of reactor were observed at near the wall of reactor, and the particle size ($ 1.2 {\mu\textrm{m}$) of near the wall was larger than that ($0.9 {\mu\textrm{m}$) of the center.

키워드