Fatigue Life and Peneration Behaviour of Material under Combined Tension and Bending Stress

인장 굽힘피로를 받는 부재의 피로수명과 균열관통

  • 남기우 (부산수산대학교, 재료공학과)
  • Published : 1994.06.01

Abstract

The leak-before-break(LBB) design on the large structures such as ship's hull, tank structure, pressure vessels etc. is one of the most inportant subjects for the evaluation and the assurance of safety. In these structures, various loads are acting. In some structural members, therefore, out-of-plane stress due to bending often may become with in-plane stress due to stretching. In the present report, the characteristics of fatigue life and peneration behaviour from a surface cracked plate under combined tension and bending have been studied experimentally and analytically by using eccentricity. Estimation of fatigue crack growth was done with the Newman-Raju formula before penetration, and with the stress intensity factor after penetration proposed by the author. Calculated aspect ratio showed the good agreement with the experimental result. It was also found that particular crack growth behaviour and crack shape after penetration can be satisfactorily evaluated using the K solution proposed.

Keywords

References

  1. IMO Resolution A 328(IX) Code for the construction and equipment of ships carrying liquefied gases in bulk
  2. Boiler and pressure vessel code. Sec. XI
  3. Jap. Soc. of Nav. Archit v.137 A preliminary study on surface crack growth in a combined tensile and bending fatigue process M.Kawahara;M.Kurihara
  4. Z. Werkstofftech v.14 Further considerations on the development of surface cracks under stable crack extension B.Ruttenauer;W.Setz;L.Grueter
  5. Int. J. Pres v.49 Shape development of surface defects in tension fatigued finite thickness plates M.D.Gilchrist;M.I.Chipalo;R.A.Smith
  6. 대한기계학회논문집 v.15 고장력강의 피로수명과 균열 관통 거동에 관한 연구 남기우
  7. Fatigue Fract. Eng. Mater. Struct. v.15 Leak-before-break conditions of plates and pipes under high fatigue stresses K.W.Nam;K.Ando;Y.Sakai;N.Ogura
  8. Fatigue Fract. Eng. Mater. Struct. v.16 The effect of specimen size on the behaviour of fatigue-crack-penetration K.W.Nam;K.Ando;N.Ogura
  9. Eng. Fract. Mech. v.15 An empirical stress intensity factor equation for the surface crack J.C.Newman,Jr.;I.S.Raju
  10. J. Math. Phys v.47 Effect of plate thickness on the bending stress distribution around through cracks R.J.Hartranft;G.C.Sih
  11. Mechanics of fracture v.3 G.C.Sih