한국표면공학회지 (Journal of the Korean institute of surface engineering)
- 제27권4호
- /
- Pages.234-240
- /
- 1994
- /
- 1225-8024(pISSN)
- /
- 2288-8403(eISSN)
Ion Mass Doping 법을 이용한 Phosphorus 주입된 실리콘 박막의 Annealing 특성
Annealing Characteristic of Phosphorus Implanted Silicon Films using an Ion Mass Doping Method
초록
A large area impurity doping method for poly-Si TFT LCD has been developed. The advantage of this method is the doping of impurities into Si over a large area without mass separation and beam scanning. Phosphorus diluted in hydrogen was discharged by RF(13.56MHz) power and ions from discharged gas were accelerated by DC acceleration voltage and were implanted into deposited Si films. The annealing characteristic of this method was similar to that of the ion implantation method in the low doping concentration. Three mechanisms were evolved in the annealing characteristics of phosphorus doped Si films. Point defects annihilation and the retrogradation of dopant atoms at grain boundaries as a result of grain growth played a major role at low and high annealing temperature, respectively. However, due to the dopant segregation, the reverse annealing range existed at intermediate annealing temperature.
키워드