Computational Structural Engineering (전산구조공학)

Computational Structural Engineering Institute of Korea (한국전산구조공학회)
권호 표지

Finite Element Analysis for Vibration of Laminated Plate Using a Consistent Discrete Theory Part II : Finite Element Formulation and Implementations

복합재료적층판의 진동해석을 위한 유한요소모델 II. 유한요소모델의 유도 및 해석

  • Published : 1994.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Based on a variational principle of the consistent shear deformable discrete laminate theory derived in the companion paper Part I, a finite element procedure for the vibration analysis of laminated composite plates is presented. The present formulation takes the in-plane displacements of an arbitrary layer, the rotations of the cross section of each layer and transverse displacement of the plate as the state variables at a nodal point of finite element, resulting in total nodal degree of freedom of 2(n+l) +1 for the n-layered laminate. Thus, it allows to specify displacement boundary conditions of layer stretching and/or rotation of layer cross sections around the plate edge and/or lateral displacement. The developed procedure is applied to the free vibration problem for sandwich-type hybrid laminates composed of layers with drastically different material properties whose elasticity solutions are known. Comparison of analysis results with other FEM solutions showed that the present formulation yields better accuracy.

앞의 논문 Part 1 에서 유도한 변분원리를 이용하여 복합재료적층판의 진동해석을 할 수 있는 유한요소해석 모델을 개발하였다. 이 모델에서는 어느 한 층의 면내 변위와 나머지층 단면의 회전각, 그리고 판 전체의 연직방향처짐을 절점변수로 취하게 되어 n개층으로된 적층판의 경우 2(n+1)+1의 절점 자유도를 갖는다. 따라서, 판의 주변에서는 한층의 면내변위와 각층단면의 회전각을, 판의 면내에서는 연직방향 처짐을 경계조건값으로 정의할 수 있다. 이 모델에 의해 개발한 프로그램을 이용하여 각층의 재료특성이 크게 다른 혼종형 복합재료적층판(hybrid laminate)의 고유진동문제를 해석하였다. 탄성이론해 및 다른 유한요소해석결과와 본 해석결과와의 비교를 통해 제시모델이 기존의 다른 유한요소모델보다 정확함을 예시하였다.

Keywords

References

  1. J. Comp. Mats v.3 Exact Solutions for Composite Laminates in Cylindrical Bending Pagano,N.J.
  2. J. Comp. Mats v.4 Exact Solutions for Rectangular Bidirectional Composites and Sandwitch Plates Pagano,N.J.
  3. AIAA J. v.8 Analysis of a Simply Supported Laminated Anisotropic Rectangular Plates Whitney,J.M.;Leissa,A.W.
  4. Int. J. Solids Structs v.6 Bending, Vibration and Buckling of Simply Supported Thick Orthotropic Rectangular Plates and Laminates Srinivas,S.;Rao,A.K.
  5. J. Comp. Mats. v.4 Exact Natural Frequencies for Cross-Ply Laminates Jones,A.T.
  6. J. Comp. Mats v.5 Exact Natural Frequencies and modal Functions for a Thick Off-Axis Lamina Jones,A.T.
  7. AIAA J. v.9 A Finite Element Analysis Including Transverse Shear Effects for Applications to Laminated Plates Pryor,S.W.Jr;Barker,R.M.
  8. IJNME v.8 Finite Element Bending Analysis of Multilayer Plates Mawenya,A.S.;Davies,J.D.
  9. IJNME v.14 Finite Element Analysis of Laminated Composite Plates Panda,S.C.;Natarajan,R.
  10. IJNME v.2 Analysis of Thick and Thin Shell Structures by Curved Finite elements Ahmad,S.;Irons,B.M.;Zienkiewicz,D.C.
  11. J. Comp. Mats. v.6 Finite Element Solutions for Laminated Thick Plates Mau,S.T.;Tong,P.;Pian,T.H.H.
  12. J. Comp. Mats. v.11 Vibration Analysis of Laminated Plates and Shelis by a Hybrid Stress Element Mau,S.T.;Tong,P.;Pian,T.H.H.
  13. J. Comp. Mats v.11 Alternate Hybrid Stress Elements for Analysis of Multilayer Composite Plates Spilker,R.L.;Chou,S.C.;Orringer,O.
  14. AIAA J. v.11 Free Vobrationbs of Multilayer Composite Plates Noor,A.K.
  15. AIAA J. v.14 Anisotropy and Shear Deformation in Laminated Composite Plates Noor,A.K.;Matters,M.D.
  16. IJNME v.15 A Penalty Plate-Bending Element for the Analysis of Laminated Anisotropic Composite Plates Reddy,J.N.
  17. Int. J. Solids Struct v.2 Elastic Wave Propagation in Heterogeneous Plates Yang,P.C.;Norris,C.H.;Stavsky,Y.
  18. J. Sound and Vib. v.94 A Simple Higher-Order Theory for Laminated Composite Plates Reddy,J.N.
  19. J. Sound and Vib. v.104 Stability and Natural Vibration Analysis of Laminated Plates by Using a Mixed Element Based on a Refined Theory Putcha,N.S.;Reddy,J.N.
  20. J. Sound and Vib. v.94 Natural Vibration of Laminated Anisotropic Plates Reddy,J.N.;Kuppusamy,T.
  21. J. Sound and Vib. v.30 Refined Analysis of Composite Laminates Srinivas,S.
  22. IJNME v.31 Equivalent Homogeneous Finite Element for Composite Materials VIA Reissner Principle, Part Ⅰ: Finite Element for Plates Peseux,B.;Dubigeon,S.
  23. IJNME v.35 Partial Mixed 3-D Element for the Analysis of Thick Laminated Composite Structures Liau,C.L.;Tsai,J.S.
  24. IJNME v.35 Implementation of a Lamina-Based Constitutive Relationship for Analysing Thick composites Zywicz,E.
  25. Comp. Struct v.44 Layer Reduction Technique for Composite Laminate Analysis Lee,C.Y.;Liu,D.
  26. Int. J. Solids Struct v.19 Global-Local Laminate Variational Model Pagano,N.J.;Soni,S.R.
  27. ASTM J. Composite Technology and Research v.23 Consistent Shear Constitutive Relations for Laminated Plates Hong,S.J.;Sandhu,R.S.
  28. 한국전산공학회지 Finite Element Analysis for Vibration of Laminated Plate Using a Discrete Laminate Theory, Part Ⅰ: Variational Principles Hong,S.J.
  29. Comp. Struct. v.46 The 'Heterosis Finite' Eleent for Plate bending Hughes,T.J.R.;Cohen,M.
  30. The behavior of Structures Composed of Composite Materials Vinson,J.R.;Sierakowski,R.L.
  31. AIAA J. v.11 Theories for the Dynamic Response of laminated Plates Sun,C.T.;Whitney,J.M.