유리의 잔류응력 예측 및 감소화 방안 연구(I): 순간동결모델에 의한 유리의 잔류응력 해석

A Study on the Prediction and Reduction of Residual Stress in Glass (I): Analysis of Residual Stress in Glass by Instant Freezing Model

  • 이재춘 (명지대학교 공과대학교 무기재료공학과) ;
  • 백태현 (군산대학교 기계설계학과)
  • 발행 : 1994.08.01

초록

Residual stress measurements were made for cylindrical glass rods to compare experimental results with the calculated values obtained by Instant Freezing Model. According to the photoelastic measurements, the stress ratio of surface compression and center tension was increased from 1.4 to 2.0 as the heat-treatment temperature was lowered, the fictitious forzen temperature was found to be closer to the heat-treatment temperature and the fictitious coefficient was increased.

키워드

참고문헌

  1. 직시형 CRT 개발 한송엽(외)
  2. The Handbook of Glass Manufacture v.Ⅱ Annealing an Tempering H.A. McMaster;F.V. Tooley(ed.)
  3. Zh. Tekhn. Fiz. v.19 no.12 Tempering of Glass G.M. Bartenev
  4. J. Am. Ceram. Soc. v.54 no.7 A model of Structural Relaxa-tion in Glass O.S. Narayanaswamy
  5. Glass Science and Technology v.5 Thermal Tempering of Glass R. Gardon
  6. Theory of Thermal St-ress B.A. Boley;J.H. Weiner
  7. Heat Conduction M.N. Ozisik
  8. J. Am. Ceram. Soc. v.44 A Review of Radiant Heat Transfer in Glass R. Gardon
  9. Advances in Heat Transfer v.11 V.T. Morgan
  10. Experimental Stress Anal-ysis J.W. Dalley;W.F. Riely
  11. Handbook of Glass Properties N.P. Bansal;R.H. Doremus
  12. Trans. ASME v.80 Heat Transfer from a Rotating Cylinder with and without Crossflow W.M. Kayes;I.S. Bjorklund
  13. Pro-ceedings of The Ⅵ International Congress on Experi-mental Me-chanics v.2 A Digital Procedure for Photoelastic Fringe Sharpening T.H. Baek;B.H. Koerner;C.P. Burger
  14. Relaxation in Glass and Composites G.W. Scherer