ATM 멀티플렉서에서의 우선순위 메카니즘에 관한 연구

A Study on the Performance of Priority Mechanisms in ATM Multiplexer

  • 윤성호 (광운대학교 전자통신공학과) ;
  • 박광채 (조선대학교 전자공학과) ;
  • 이재호 (광운대학교 전자통신공학과)
  • 발행 : 1993.06.01

초록

ATM망의 스위칭 노드나 ATM멀티플랙서에서는 셀의 헤더내에 있는 1-비트의 CLP(Cell Loss Priority)를 사용하여 우선순위 제어를 함으로써 대역폭의 사용효율을 높인다. 본 논문에서는 기존 공간 우선순위 제어(space priority control) 메카니즘들의 단점들을 보완하고 높은 우선순위 셀의 손실 확률을 줄이기 위한 혼합형 메커니즘을 제안하며 이 메커니즘에 대한 성능을 셀 손실 확률면에서 분석하였다. 제안한 혼합형 메카니즘의 성능 평가는 우선순위 제어가 없는 메카니즘, 축출 메카니즘 및 부분버퍼공유 메카니즘에 대한 셀 손실 확률을 비교하였다. 셀 손실 확률은 M/D/1/N모델링과 2-state MMPP/D/1/N모델링을 사용하여 해석하였으며 이 두 가지 모델링에 대한 비교도 병행하였다. 각 메카니즘에 대한 해석값은 PC의 SIMSCRIPT II.5를 이용한 컴퓨터 시뮬레이션으로 검증하였다.

In a switching node or an ATM multiplexer of the ATM network, a good bandwidth utilization can be achieved by the priority control using the 1-bit(Cell Loss priority) in ATM cell header. In this paper, the mixed mechanism is proposed to make up for shortcomings of existing space priority control mechanisms and to decrease the loss probability of high priority cell and its performance is analyzed about the cell loss probability. To estimate the performance of proposed mixed mechanism, its cell loss probability is compared with those of non-priority mechanism, push-out mechanism and partial buffer sharing mechanism. The cell loss probability is analyzed using a M/D/1/N modeling and a 2-state MMPP/D/1/N modeling and also comparison between two modelings is made. To verify this result of numerical analysis, the computer simulation is performed for each mechanism using the simulation language, SIMSRIPT II.5.

키워드