Journal of Advanced Marine Engineering and Technology
- Volume 17 Issue 3
- /
- Pages.80-87
- /
- 1993
- /
- 2234-7925(pISSN)
- /
- 2234-8352(eISSN)
Study on the Design of Thin Intersected Axe Gear
박육직교축 치차의 설계에 관한 기초적 연구
Abstract
The various configuration of thin-shaped bevel gears are used usually for such as main reduction gear of the hovercraft. But the reasonable and concise guide to thedesign of the se bevel gears is not yet obtained, since the tooth of bevel gear has complex form. The purpose of these investigation is to be establish the design guide and to propose the desirable configuration form for thin-shaped straight bevel gear. In this report, the desirable configuration is examined experimentally by clearing up the effect of web and rim thickness, rim support condition upon the load distribution and root stress distribution along the tooth trace. The results are summarized as follows. (1) The crowning of tooth trace exerts a significant effect on the root stress distribution of thin-shaped bevel gear. (2) As the desirable configuration of the thin-shaped bevel gear, it is to be recommended that the rim is supported at the heel side of tooth trace. (3) But, as special type, it is desirable that the rim is supported at the toe side.
Keywords