Journal of Korea Foundry Society (한국주조공학회지)
- Volume 12 Issue 3
- /
- Pages.210-219
- /
- 1992
- /
- 1598-706X(pISSN)
- /
- 2288-8381(eISSN)
A Study on Fabrication and Sintering Behavior of Al-Pb-X(Sn,Sn-Si) clad strips
급냉응고한 Al-Pb-X(Sn,Sn-Si)계 합금분말(合金粉末)의 압연판재(壓延板材)의 제조(製造)와 소결(燒結)특성
- Choi, Jong-Gu (Dept. of metallurgical Eng., and material Hong Ik Univ.) ;
- Moon, Jong-Tai (Dept. of metallurgical Eng., and material Hong Ik Univ.) ;
- Lee, Yong-Ho (Dept. of metallurgical Eng., and material Hong Ik Univ.) ;
- Cho, Sung-Suk (Dept. of Metallurgical Eng., Chung Nam Univ.)
- 최종구 (홍익대학교 공과대학 금속재료공학과) ;
- 문종태 (홍익대학교 공과대학 금속재료공학과) ;
- 이용호 (홍익대학교 공과대학 금속재료공학과) ;
- 조성석 (충남대학교 공과대학 금속공학과)
- Published : 1992.06.20
Abstract
The measurement of the apparent and tap density for Al-Pb-X(Sn,Sn-Si) powders produced by centrifugal atomizer showed that the larger theoretically calculated densities the larger those densities. And tap densities were not over 50% of the theoretical densities. The nip angle of Al-5wt%Pb alloy powders produced with 38000 r.p.m. of disk rotation was
Keywords