고특성 $Nd_{12}Fe_{80}B_{6}(Nb, M)$ (M=Ti/Cu/Ga)급속응고리본의 자기특성

Magnetic Propwrties of High Quality $Nd_{12}Fe_{80}B_{6}(Nb, M)$ (M=Ti/Cu/Ga) Melt-Spun Ribbons

  • 김윤배 (한국표준연구소) ;
  • 김창석 (한국표준연구소) ;
  • 김동환 (충남대학교 공과대학 금속공학과) ;
  • 이갑호 (충남대학교 공과대학 금속공학과) ;
  • 김택기 (충남대학교 공과대학 금속공학과)
  • 발행 : 1992.02.01

초록

단롤법 급속응고기술을 이용하여 $Nd_{12}Fe_{80}B_{6}(Nb,\;M)$ (M=Ti/Cu/Ga) 리본을 제작하고 이의 자기특성 및 미세조작에 관한 연구를 하였다. X-선 회절 및 TEM을 이용한 미세조직 조사 결과, 리본의 이방화에 Ga이 효과적이며, 디스크표면속도 17.9 m/s로 제작한 $Nd_{12}Fe_{80}B_{6}(Nb,\;Ca)$ 리본은 약 30 nm의 미세한 결정립으로 구성되고 자유표면이 이방화된 조직으로 형성됨을 알았다. 이 리본을 분쇄하여 자장중에서 정렬시킨 분말의 잔류자속밀도는 0.87 T의 높은 값을 보였으며, 분쇄하기전 리본의 잔류자속밀도에 비하여 약 5% 정도 높았다. 이상의 결과로 부터 리본의 자유표면은 이방화가 되고 나머지 부분은 HIREM 특성을 나타내는 새로운 형태의 고특성 급속응고리본의 제조가 가능할 것으로 사료된다.

Magnetic properties and microstructures of $Nd_{12}Fe_{80}B_{6}(Nb,\;M)$ (M=Ti/Cu/Ga) melt-spun ribbons prepared by single wheel technique have been studied. The results of microstructural study have shown that Ga is effective for the orientation of c-axis normal to the ribbon plane. The Ga-added melt-spun ribbon, $Nd_{12}Fe_{80}B_{6}(Nb,\;Ga)$, quenched at $V_{s}=17.9\;m/s$ was mostly composed of fine grains of about 30 nm in size with the textured free-side surface. The powder of this ribbon aligned in mag-netic field showd a high remanence of 0.87 T which was about 5 % higher than that of ribbon itself. It is believed that there is a possibility to fabricate a new type of HIREM melt-spun ribbon with highly textured free-side surface.

키워드