The Effect of PbO on Sintering of Undoped PbTiO3 Ceramics Prepared by Sol-Gel Processing

PbO가 Sol-Gel Process로 제조된 순수 PbTiO3 세라믹스의 소결에 미치는 영향

  • 김선욱 (산업과학기술연구소 무기재료연구분야 기능세라믹연구그룹) ;
  • 윤만순 (산업과학기술연구소 무기재료연구분야 기능세라믹연구그룹) ;
  • 김남흥 (산업과학기술연구소 무기재료연구분야 기능세라믹연구그룹)
  • Published : 1992.05.01

Abstract

Undoped PbTiO3 ceramics was successfully prepared by using sol-gel process, which had not been fabricated due to its microcracks created by anisotropic stress during phase transition from cubic to tetragonal phase. Fabrication of undoped PbTiO3 ceramics via sol-gel processing was very much affected by the PbO content of the samples as well as PbO vapor from sintering atmosphere. Excess PbO was found to promote rapid grain growth in PbTiO3 ceramics. After sintering at 1100$^{\circ}C$ average grain size of PbTiO3 ceramics with excess PbO was about 8 times greater than that of stoichiometric composition, which may be due to PbO liquid phase from excess PbO.

Keywords

References

  1. Ceramic dielectrics Vol.8.;Processings of the symposium on Ceramic Dielectrics Indianapolis, Indiana v.8 Thermal analysis and X-ray diffraction pattern studies of the high temperature phase transformation in PbTiO₃single crystals T. Carlos;A. Suchicital;D.A. Payne;H.C.Ling(ed.);M.F.Yan(ed.)
  2. Ferroelectrics v.37 Dielectric and Pyroelectric properties of a PbTiO₃Ceramic series modified by Mn. Nb and Ce X. Yunhuan(et al.)
  3. J. Am. Ceram. Soc. v.43 no.3 Studies on Lead Titanate Ceramics containing Niobium or Tantalum E.C. Subbarao
  4. Am. Ceram. Bull. v.69 no.4 Lead titanate ceramics with lange piezoelectric anisotropy and their Application T. Takahashi
  5. J. Am. Ceram. Soc. v.49 no.4 Effect of Grain Size on Microcracking in Lead Titanate Ceramics Y. Matsuo;H. Sasaki
  6. J. Appl. Phys. v.7 no.3 Piezoelectric Properties of Modified PbTiO₃Ceramics L. Ueda;S.I. Kegami
  7. Ferroelectrics v.94 Ceramic Particles from Sol-Gel Process for the Preparation of PbTiO₃Composites L.D. Olms(et al.)
  8. Ferroelectrics v.94 Elaboration of Perovskite by Decomposition of Coprecipitated Oxalates for Electronic Ceramics S. Rimlinger(et al.)
  9. J. Kor. Ceram. Soc. v.29 no.3 Fabrication of Pure PbTiO₃Ceramics by Sol-Gel Processing S. Kim(et al.)
  10. Trans. J. Br. Ceram. Soc. v.79 no.4 M.A. Eisa(et al.)
  11. Am. Ceram. Soc. v.8 Phase Diagrams for Ceramists M.A. Eisa(et al.)