의치수리(義齒修理)에 있어 파절접합부(破折接合部)의 조작형태(造作形態)가 의치(義齒)의 결합력(結合力)에 미치는 영향(影響)에 관(關)한 연구(硏究)

A STUDY REPAIRED JOINT STRENGTH OF COMPLETE DENTURE

  • 이우현 (단국대학교 치과대학 보철학교실) ;
  • 허성주 (단국대학교 치과대학 보철학교실) ;
  • 조인호 (단국대학교 치과대학 보철학교실)
  • Lee Woo-Hyun (Department of Prosthodontic, College of Dentistry, Dankook University) ;
  • Heo Seong-Joo (Department of Prosthodontic, College of Dentistry, Dankook University) ;
  • Cho In-Ho (Department of Prosthodontic, College of Dentistry, Dankook University)
  • 발행 : 1991.12.01

초록

The purpose of this study was to compare the repaired joint strength among several edge profiles after denture repair. For this study, eight edge profiles were used for repair methods and five self-curing resin brands were used for repair materials. Break away loads were tested after 1 hr., 24 hrs. and 1 week. Instron was used for testing the transverse strength of repaired specimen. The results were as follows. 1. Repaired joint strength was about 35-65% of that of original specimen. 2. Joint strengths of round, inverse knife, inverse rabbit, lap ogee joint were higher tnan that of traditional simple butt joint 3. Joint strength of the simple butt joint was low significant. 4. Joint strengths after 1 hr. specimen were lower than those of 24 hrs. and 1 week specimens in joint strengths. 5. There were no significant differences between 24 hrs. and 1 week specimens in joint strengths. 6. It look more than 24 hours to gain satisfactory physical property after repairing the fractured denture base when self-curing resin was used for repair.

키워드