한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)
- 제8권2호
- /
- Pages.36-46
- /
- 1991
- /
- 1225-9071(pISSN)
- /
- 2287-8769(eISSN)
드릴가공에 있어서 동적성분의 특성에 관한 연구
A Study on Characteristic of the Dynamic Component in Drilling
초록
This study was carried out to investigate the characteristic of dynamic component in drilling. Materials used were carbon steel, brass and cast iron, and the drills used were high speed steel drill and cemented carbide. The cutting resistance generated in drilling was detected with the aid of piez0-electric tool dynamometer which has an excellent frequency response, and then the magnitude and shape of dynamic component and its frequency component as well were analyuzed. After a thorough study of interrelationship, the obtained results are as follows; 1) The shape of torque and thrust of the early drilling are different. 2) The shapes of dynamic component can be classified into four kinds. 3) Torque is related to frequency more closely than thrust. 4) As cutting speed increased, dynamic component increased. 5) Chipping took place continuously, and its size decreased as cutting proceeded.
키워드