Journal of the Korean Wood Science and Technology
- 제19권3호
- /
- Pages.27-34
- /
- 1991
- /
- 1017-0715(pISSN)
- /
- 2233-7180(eISSN)
국산 파티클보오드와 중밀도 섬유판의 나사못 유지력(I) - 최적 예비구멍 직경 -
Holding Strength of Screws in Domestic Particleboard and Medium Density Fiberboard (I) - Optimum Pilot Hole Diameter -
- Lee, Phil-Woo (College of Agriculture, Seoul National University) ;
-
Park, Hee-Jun
(College of Agriculture, Seoul National University) ;
- Han, Yu-Soo (College of Agriculture, Seoul National University)
- 투고 : 1991.06.17
- 발행 : 1991.09.30
초록
Screw withdrawal test was carried out on the face and edge of domestic particleboard and medium density fiberboard in order to evaluate optimum pilot hole diameter. The obtained results were as follows: 1. Maximum withdrawal strengths on the face and edge of particleboard were obtained with pilot hole diameters at about 50% of root diameters of screw. 2. Maximum withdrawal strength on the face and edge of medium density fiberboard were obtained with pilot hole diameters that were about 60% and 50% of root diameters of screw, respectively. 3. Withdrawal strength showed about 91% of maximum withdrawal strength when pilot holes were not pre bored at particleboard. but when pilot holes at 90% of root diameter of screw withdrawal strength showed about as 51.3% of maximum withdrawal strength. 4. Withdrawal strength showed about 88% of maximum strength when pilot holes were not used, but withdrawal strength indicated 55.4% of maximum strength in case of 90% of root diameters of screw. 5. Maximum withdrawal strength on the face of particleboard was about 70.5% higher than that of the edge, and however medium density fiberboard was about 19.6% higher than that of the edge.
키워드