Effect of Ti and Sr on the Microstructure of Al-Si-Mg Casting Alloy

Al-Si-Mg계 주조합금의 미세조직에 미치는 Ti 및 Sr첨가 영향

  • 정재영 (한국기계연구원 내식재료실) ;
  • 김경현 (한국기계연구원 내식재료실) ;
  • 김창주 (한국기계연구원 내식재료실)
  • Published : 1990.12.20

Abstract

This investigation was undertaken to establish the technologies of grain refinement and modification, and to characterize material properties, essential for high quality aluminum alloy castings. Grain refinement seldom changed DAS and eutectic Si size, but largely decrease grain size. The variations of grain size induced by grain refinement had a great influence on the elongation without changes in the tensile strength or yield strength. The optimum Ti level lies between 0.1% and 0.16% to achieve the best possible mechanical properties. DAS and grain size were little affected, but eutectic Si size was greatly refined by modification. The variation of eutectic Si size had a great effect on the elongation, impact value, fracture toughness and fatigue crack propagation rate without changes in the tensile strength or yield strength. The Sr content of 0.015% is optimum to modification.

Keywords