Development of Austempered Ductile Iron With High Strength and High Toughness for Automotive Parts

고강도 ADI 의 자동차 부품개발에 관한 연구

  • Kim, Won-Yong (Department of Metallurgical Engineering, Inha University.) ;
  • Lee, Young-Sang (Department of Metallurgical Engineering, Inha University.) ;
  • Kim, Gwang-Bae (Department of Metallurgical Engineering, Inha University.) ;
  • Kang, In-Chan (Department of Metallurgical Engineering, Inha University.)
  • Published : 1990.10.20

Abstract

The application of this new design approach called fracture mechanics allow one to determine the maximum allowable stress from the knowledge of the largest expected flow size and the plane strain fracture toughness of a material. In this study we examined the relation between retained austenite, mechanical property and fracture toughness accompanied by austempering heat treatment. Fracture toughness values and retained austenite volume were higher with the ADI(austempered ductile iron) which were austempered at $380^{\circ}C$ than austempered at $320^{\circ}C$. Additionally, fracture toughness values were increased for 1~2 hour austempering time but it was slowly decreased for 5 hour ADI maintaining the predominant fracture toughness($K_{IC}:83MPa{\sqrt{m}}$) is obtained following condition, namely, austempering temperature and time ($380^{\circ}C$ and 1 hour).

Keywords