Profile Index에 따른 Panelipse Ⅱ 방사선 상층의 변화

The Image Changes in the Control Panelipse Radiography by the Control of the Profile Index

저자는 Panelipse Ⅱ의 상층 및 상의 확대변화를 관찰하기 위하여 모형판에 금속구를 위치시켜 3가지 Profile Index에서 각기 20장씩 방사선사진을 촬영하여 관찰한 결과를 다음과 같이 요약할 수 있었다. Profile Index의 증가에 따른 Panelipse Ⅱ 방사선상의 상층에 있어 모양의 변화는 없었고, 폭은 더 넓어졌으며, 회전축중심에서 외측으로 상층은 이동하였다. 방사선상에서 수평 수직확대는 공히 Profile Index가 증가함에 따라 그 범위가 커졌으며 이는 수평확대에 있어 수직확대보다 현저하였다.

This research was made to investigate the change of the image layer and of the vertical and horizontal magnification on the Panelipse radiographic image by the control of profile index. Using the Panelipse, a series of 60 exposures were taken with the steel balls placed in the holes of the plastic model plate, and then evaluated by 4 observers. Two points were assigned for a reading of sharp, one for middling sharp, and zero for unsharp. Each ball image then could be given a total reader score of 0 to 8. The author analyzed the image layer as defined by a sharpness score of 6 or more. The results obtained were as follows: As the profile index was increased, the shape of the image layer was not changed, and the width of the image layer was increased, and the position of the layer shifted away from the rotation center. As the profile index was increased, the ranges of vertical and horizontal magnification was increased, especially the ranges of horizontal magnification was greater than that of vertical magnification.