A Study on the Comparison of Injection Rate Measurement by the Bosch`s Method and the Zeuch`s Method

Bosch법과 Zeuch법에 의한 분사율 , 측정의 비교연구

  • Published : 1990.03.01

Abstract

There have been many methods for measuring the injection rate of diesel engines, but the results of them are not always identical and the reason for the discordance is not clear. Besides, a single shot injection equipment has been used for the fuel spray and the combustion research of diesel engines, but the results of experiment using the equipment don't apply to a volleyed shot injection of real engines. This paper investigates the merits and faults of the Bosch's method and the Zeuch's method, at the same, this paper also compares the injection rates of single shot inject rates of single shot injection and a volleyed shot injected by the Bosch's method. the results are summarized as follows: (1) The measurement error of the Bosch's method is about $\pm$1%, therefore, its accuracy is reliable. (2) By the Bosch's method, as the speed and the load of fuel pump increase, the injection rate becomes higher, on the contrary, the injection period(ms) shortens as the speed increases and the load decreases. (3) In this experiment, the injection rate of a single shot injection is lower than that of a volleyed shot injection under the same conditions. (4) The bulk modulus of elasticity using the Zeuch's method increases in proportion to the back pressure. (5) The Zeuch's method is less accurate than the Bosch's method.

Bosch법과 Zeuch법의 분사율 측정기를 직접설계, 제작하여 분사율 측정실험을 행한 결과 다음과 같은 결론을 얻었다. 1. Bosch법 분사율 측정기는 분사량의 참 값에 대한 측정오차가 약 $\pm$1%로 정밀도와 신뢰성이 높았다. 2. Bosch법 분사율 측정기에서, 분사율은 연료펌프의 회전수와 부하가 증가할수록 높아지는 반면, 분사기간(ms)은 회전수가 증가할수록 짧아짐을 알 수 있었다. 3. 본 실험에서는, 동일조건하의 단발분사가 연발분사에 비해 전체적으로 분사율이 낮고 기관의 1 cycle당 분사량도 약 30% 정도 적었다. 4. Zeuch법 분사율 측정기로 구한 체적강성계수의 값은 배압이 증가할수록 증가함을 알 수 있었다. 5. Zeuch법 분사율 측정기는 Bosch법 분사율 측정기에 비해 정밀도가 낮았다.

Keywords