참고문헌
- J. Am. Ceram. Soc. v.66 no.4 Sintering of PZT Ceramics:Ⅱ, Effect of PbO Content on Densification Kinetics A.I. Kingon;J.B. Clark
-
J. Am. Ceram. Soc.
v.71
no.3
Effect of Excess PbO on the Sintering Characteristics and Dielectric Properties of Pb(
$Mg_{\frac{1}{3}}Nb_{\frac{2}{3}}$ )O₃-PbTiO₃-Based Ceramics J.P. Guha;D.J. Hong;H.U. Andersion - Piezoelectric Ceramics B. Jaffe;W.R. Cook;H. Jaffe
- Ferroelectric v.41 Effects of Impurity Doping in Lead Zirconate-Titanate Cermics S. Takahashi
- J. Am. Ceram. Soc. v.66 no.10 Characterization and Sintering of Lead Zirconate Titanate Powders S.H. Cho;J.V. Biggers
- Am. Ceram. Soc Bull. v.60 no.4 Effect of Processing on Microstructure and Properties of PZT Ceramics S.S. Chiang;M. Nishioka;R.M. Fulrath;J.A. Pask
- J. Am. Ceram. Soc. v.64 no.4 Sintering of PZT Ceramics Ⅰ, Atmosphere Control A.I. Kingon;J.B. Clark
- Cerm. Ind. Mag Oxygen Firing can Replace Hot Pressing for PZT T.F. Murray;R.H. Dungan
- Ferroelectrics v.37 Effect of Sintering Heating Rate on the Electrical Properties of Sr-PZT C.E. Hall;J.B. Blum
- J. Br. Ceram. Soc. v.80 no.5 Fast-Firing of Non Stoichiometric BaTiO₃ H. Mostaghaci;R.J. Brook
- Trans. J. Br. Ceram. Soc. v.82 no.5 Production of Dense and Fine Grain Size BaTiO₃by Fast Firing H. Mostaghaci;R.J. Brook
- J. Mater. Sci. v.21 Microstructure Development and Dielectric Properties of Fast-Fired BaTiO₃Ceramics H Mostaghaci;R.J. Brook
- J. Br. Ceram. Soc. v.80 no.5 Fast Firing Microstructural Benefits M.P Harmer;R.J. Brook
- J. Am. Ceram. Soc. v.71 no.7 Fast Firing and Coventional Sintering of Lead Zirconate Titanate Ceramics C.E. Baumgartner
- Proc. Br. Ceram. Soc. v.32 Fabrication Principles for the Production of Ceramics with Superior Mechanical Properties R J. Brook
- Material Science Research;Sintering and Related Phenomena v.6 Studies in Densification Dyamics H. Palmour III;M.L. Huckabee;G.C. Kuczynski(ed.)
- J. Am. Ceram. Soc. v.72 no.5 Effect of Excess PbO on the Densification of PLZT Ceramics B.M. Song;D.Y. Kim;S. Shirasaki;H. Yamamura
- Trans. AIME. v.3 Measurement of Particle Size in Opaque Bodies R.L. Fullmann
- Material Science Research;Sintering Processes v.13 The Effect of Grain Growth and Particle Coarsening on Sintering R.M. Cannon;G.C. Kuczynski(ed.)
- J. Am. Ceram. Soc. v.70 no.10 Effect of Sintering Atmosphere on Isolated Pores during the Liquid Phase Sintering of MgO-CaMgSiO₄ J.J. Kim;B.K. Kim;B.M. Song;D.Y. Kim;D.N. Yoon
- Metall. Trans A. v.15A no.6 Pore Filling Process in Liqukd Phase Sintering H.Y. Park;S.J. Cho;D.N. Yoon
- J. Am. Ceram. Soc. v.69 no.1 Liquid Redistribution during Liquid-Phase Sintering T.M. Shaw
- Trans. Br. Ceram. Soc. v.77 The Preparation of Transparent PLZT Ceramics from Oxide Powders by Liquid-Phase Sintering A.D. James;P.M. Messer