Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지

Effect of heating Rate on the Microstructural Evolution during Sintering of PZT Ceramics

PZT 요업체의 소결과정 중 승온속도가 미세조직에 미치는 영향

  • 박은태 (경북대학교 무기재료공학과) ;
  • 김정주 (경북대학교 무기재료공학과) ;
  • 조상희 (경북대학교 무기재료공학과) ;
  • 김도연 (서울대학교 무기재료공학과)
  • Published : 1990.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

The effect of heating rate on the microstructural evolution during sintering of PZT ceramics has been investigated. In case of PZT powder compacts containing excess of PbO, fast heating caused incomplete rearrangement of solid grains in a liquid, resulting in lower density and inhomogeneous pore shape ; on contrary, slow heating resulted in better densification. In contrast, in case of compacts without excess PbO, the densification was enhanced by fast heating due to suppression of the grain growth.

Keywords

References

  1. J. Am. Ceram. Soc. v.66 no.4 Sintering of PZT Ceramics:Ⅱ, Effect of PbO Content on Densification Kinetics A.I. Kingon;J.B. Clark
  2. J. Am. Ceram. Soc. v.71 no.3 Effect of Excess PbO on the Sintering Characteristics and Dielectric Properties of Pb($Mg_{\frac{1}{3}}Nb_{\frac{2}{3}}$)O₃-PbTiO₃-Based Ceramics J.P. Guha;D.J. Hong;H.U. Andersion
  3. Piezoelectric Ceramics B. Jaffe;W.R. Cook;H. Jaffe
  4. Ferroelectric v.41 Effects of Impurity Doping in Lead Zirconate-Titanate Cermics S. Takahashi
  5. J. Am. Ceram. Soc. v.66 no.10 Characterization and Sintering of Lead Zirconate Titanate Powders S.H. Cho;J.V. Biggers
  6. Am. Ceram. Soc Bull. v.60 no.4 Effect of Processing on Microstructure and Properties of PZT Ceramics S.S. Chiang;M. Nishioka;R.M. Fulrath;J.A. Pask
  7. J. Am. Ceram. Soc. v.64 no.4 Sintering of PZT Ceramics Ⅰ, Atmosphere Control A.I. Kingon;J.B. Clark
  8. Cerm. Ind. Mag Oxygen Firing can Replace Hot Pressing for PZT T.F. Murray;R.H. Dungan
  9. Ferroelectrics v.37 Effect of Sintering Heating Rate on the Electrical Properties of Sr-PZT C.E. Hall;J.B. Blum
  10. J. Br. Ceram. Soc. v.80 no.5 Fast-Firing of Non Stoichiometric BaTiO₃ H. Mostaghaci;R.J. Brook
  11. Trans. J. Br. Ceram. Soc. v.82 no.5 Production of Dense and Fine Grain Size BaTiO₃by Fast Firing H. Mostaghaci;R.J. Brook
  12. J. Mater. Sci. v.21 Microstructure Development and Dielectric Properties of Fast-Fired BaTiO₃Ceramics H Mostaghaci;R.J. Brook
  13. J. Br. Ceram. Soc. v.80 no.5 Fast Firing Microstructural Benefits M.P Harmer;R.J. Brook
  14. J. Am. Ceram. Soc. v.71 no.7 Fast Firing and Coventional Sintering of Lead Zirconate Titanate Ceramics C.E. Baumgartner
  15. Proc. Br. Ceram. Soc. v.32 Fabrication Principles for the Production of Ceramics with Superior Mechanical Properties R J. Brook
  16. Material Science Research;Sintering and Related Phenomena v.6 Studies in Densification Dyamics H. Palmour III;M.L. Huckabee;G.C. Kuczynski(ed.)
  17. J. Am. Ceram. Soc. v.72 no.5 Effect of Excess PbO on the Densification of PLZT Ceramics B.M. Song;D.Y. Kim;S. Shirasaki;H. Yamamura
  18. Trans. AIME. v.3 Measurement of Particle Size in Opaque Bodies R.L. Fullmann
  19. Material Science Research;Sintering Processes v.13 The Effect of Grain Growth and Particle Coarsening on Sintering R.M. Cannon;G.C. Kuczynski(ed.)
  20. J. Am. Ceram. Soc. v.70 no.10 Effect of Sintering Atmosphere on Isolated Pores during the Liquid Phase Sintering of MgO-CaMgSiO₄ J.J. Kim;B.K. Kim;B.M. Song;D.Y. Kim;D.N. Yoon
  21. Metall. Trans A. v.15A no.6 Pore Filling Process in Liqukd Phase Sintering H.Y. Park;S.J. Cho;D.N. Yoon
  22. J. Am. Ceram. Soc. v.69 no.1 Liquid Redistribution during Liquid-Phase Sintering T.M. Shaw
  23. Trans. Br. Ceram. Soc. v.77 The Preparation of Transparent PLZT Ceramics from Oxide Powders by Liquid-Phase Sintering A.D. James;P.M. Messer