참고문헌
- Textile Ind. S.M.Suckecki
- 44th All Indai Textile Conference B.C.Goswami
- U.S.Pat., 4,615,256 Fukuda(et al.)
- Manufacture of Multi-Layer Woven Preforms M.H.Mohamed
- 3차원 직물 복합재료의 역학적 성질 홍성각;김범준;강태진;육종일
한국섬유공학회지 (Textile Science and Engineering)
- 제27권7호
- /
- Pages.62-70
- /
- 1990
- /
- 1225-1089(pISSN)
- /
- 2288-6419(eISSN)
3차원 직물의 제직기술과 기하학적 모형
Manufacture and Analysis of Three-Dimensional Woven Preforms for Composite
- Hong, Seong-Gak (Department of Textile Engineering, Seoul National University) ;
-
Gang, Tae-Jin
;
- Yuk, Jong-Il
- 발행 : 1990.07.01
초록
A hand operative three-dimensional weaving machine was built to study the effect of the geometry of the preform on the mechanical properties of the 3-D woven fabric composite material. Based on the geometrical model of three-dimensional woven fabric, weaving parameters including overall dimensions, yarn run-in, reed density and take-up rate are determined from a yarn spacing and the member of yarns interlaced in X-, Y-, and Z-directions. Fiber volume fraction of warp, filing and Z-yarns are obtained as a function of linear density of the reinforced fiber, yarn spacing, and contraction of each yarn. The maximum fiber volume fraction was calculated to be 68.0 f for balanced 3-D woven fabric when yarns assuming circular cross-sections.
키워드