광탄성 직교이방성체의 물성치와 응력 프린지치 간이 측정법

The simple measurement of physical properties and stress fringe value for photo-elastic orthotropic material

본 연구에서는 Iosipescu의 전단 시험법을 사용하여 직접 측정한 응력 프린지 치(ｆ$_{LT}$ )와 Sampson의 응력-광법칙에 의하여 구한 ｆ$_{LT}$ 와 서로 비교하여 Sampson의 응력-광법칙이 ｆ$_{LT}$ 를 간접적으로 측정하는데 사용할 수 있는가를 확 인한다. 그리고 직교 이방성 재료를 광탄성 실험에 의하여 해석하는 경우에 필요한 기본물성치와 응력 프린지치 관계를 구하여 이 관계가 상온과 고온에서도 성립하는가 를 확인하고 또 직접 물성치를 측정하는 대신에 각 물성치에 대응되는 응력 프린지치 에 의하여 물성치를 구하는 방법을 개발하는데 이 연구의 목적을 둔다.

The various composite materials have been developed with the development of high strength material and the increasement of composite material usage. Therefore many researchers have studied about the stress analysis and the fracture mechanics for composite materials through the experiment or the theory. Among the experimental methods, the photoelastic experiments have been used for the stress analysis of the isotropic structures or the anisotropic structures. To analyze the stresses in the orthotropic material with photoelastic experiment, the basic physical properties ( $E_{L}$, $E_{T}$, $G_{LT}$ , .nu.$_{LT}$ ) and the basic stress fringe values ( $f_{L}$, $f_{T}$, $f_{LT}$ )are needed, therefore the relationships between the basic physical properties and the stress fringe values were derived in this paper. When the stress fringe value is very large, it was assured by the experiment that the relationships are established both in the room temperature and in the high temperature (T = 130.deg. C). Therefore the basic physical properties can be obtained from the relationships by measuring stress fringe values instead of measuring the basic physical properties.rties.