Microcomputer-Based Post-Processorfor Large Finite Element Analysis

대규모 유한요소해석에 활용되는 소형컴퓨터용 후처리 그래픽 프로그램

  • 이성우 (국민대학교 토목공학과) ;
  • 이선구 (대림엔지니어링㈜정보사업그룹 전산연구개발) ;
  • 이태연 (국민대학교 토목공학과)
  • Published : 1989.12.01

Abstract

Until recently post-processing of finite element model has been heavily relied on expensive graphic peripheral devices. With the aid of inexpensive microcomputers, very economical post-processor graphics program called MICRO-POST has been developed. Model geometry or results of analysis for the unlimited meshes can be easily presented in a number of low-cost graphic devices. The paper presents the procedure obtaining the device-independent graphics, and the structure and functions of the program. It also describes efficient I/O scheme to overcome the memory limitation, and dialogue-type input technique to control the plot operation in an interactive manner. Through the post processing examples for the general purpose finite element programs, it demonstrates the usefulness of the program.

최근까지만해도 유한요소 모델의 그래픽 후처리는 주로 대형컴퓨터와 이에 수반되는 고가의 도화장비에 의존할 수 밖에 없었다. 그러나 우수한 그래픽 기능을 갖춘 저렴한 소형컴퓨터의 등장에 힘입어 대단히 경제적인 후처리 그래픽 프로그램인 MICRO-POST가 개발되었다. 이 프로그램을 이용하여 무제한 요소망으로 이루어진 대형 유한요소 모델의 기하형태나 해석결과를 각종 저가의 도화장비에 호환하여 도화처리할 수 있게 되었다. 본 논문에는 도화장비의 호환을 위한 프로그램 절차와 프로그램의 구성 및 그 기능들을 기술하였다. 또한 소형컴퓨터의 메모리 용량 극복을 위한 효율적인 I/O 기법과 도화처리를 교호 작용하면서 관리할 수 있는 대화형식의 입력방식도 기술하였다. 범용 유한요소해석 프로그램에 접속시킨 이용사례를 통하여 프로그램의 효율성을 입증하였다.

Keywords