Effect of Combining Wood Flakes and Polypropylene-net Flakes on Thickness Swelling and Bending Properties of Sawdust Board

목질(木質)플레이크와 폴리프로필렌망(網)플레이크 구성(構成)이 톱밥보오드의 팽창성(膨脹性)과 휨성질(性質)에 미치는 영향(影響)

  • Lee, Phil Woo (College of Agriculture, Seoul National University) ;
  • Eom, Young Geun (College of Agriculture, Seoul National University) ;
  • Oh, Sei Chang (College of Agriculture, Seoul National University) ;
  • Chung, In Ju (College of Agriculture, Seoul National University)
  • Received : 1988.04.19
  • Published : 1988.06.30

Abstract

This study was carried out to investigate the physical and mechanical properties of sawdust boards combined with sycamore and polypropylene-net flakes. Both the sycamore and polypropylene-net flakes were adjusted to the sizes of $1.0{\times}1.0$, $1.0{\times}2.0$, and $1.5{\times}1.5cm^2$ and these flakes were mixed at 1, 2, 3, and 4% levels based on ovendry weights of sawdusts, respectively. The results obtained in this study were summarized as follows : 1. Thickness swellings of sawdust boards combined with sycamore flakes decreased with the increase of mixture levels and similar effects were also recognized in combination with polypropylene-net flakes. 2. Moduli of rupture both in sawdust boards combined with sycamore and polypropylene-net flakes increased with the increase of their mixture levels, and sawdust boards combined with sycamore flakes of $1.0{\times}2.0cm^2$ size and polypropylene-net flakes of $1.5{\times}1.5cm^2$ size showed higher moduli of rupture than control boards. 3. Moduli of elasticity both in sawdust hoards combined with sycamore and polypropylene-net flakes increased with the increase of their mixture levels as in moduli of rupture. 4. The physical and mechanical properties of sawdust boards combined with sycamore and polypropylene-net flakes were mainly dependent on aspect ratio of sycamore flakes and size of polypropylene-net flakes respectively, and these properties were improved with the respective increase of aspect ratio and size.

목질(木質)플레이크 및 P.P망(網)플레이크를 톱밥보오드에 혼합하여 그 효과를 보고자 크기를 $1{\times}1cm^2$, $1.5{\times}1.5cm^2$, $1{\times}2cm^2$로 절단하고, 혼합량을 1%, 2%, 3%, 4%로하여 보오드를 제조(製造)하여 그 물리적(物理的) 및 기계적(機械的) 특성(特性)을 조사고찰(調査考察)한 바, 그 결론(結論)을 간단히 지으면 다음과 같다. 1) 플레이크를 혼합한 톱밥보오드의 두께 팽창율(膨脹率)은 혼합비가 증가함에 따라 감소(減少)하였고 P.P망(網)플레이크를 혼합한 경우에도 같은 양상을 보여주었다. 2) 휨파괴계수(破壞係數)는 플레이크 및 P.P망(網)플레이크의 혼합비가 증가할수록 증가하였다. 플레이크 크기가 $1{\times}2cm^2$인 경우 모두 대조보오드보다 높은 값을 나타내었고 P.P망(網)플레이크의 경우에는 $1.5{\times}1.5cm^2$ 크기일때 대조보오드보다 모두 높은 휨파괴계수치(破壞係數値)를 보였다. 3) 플레이크 혼합비가 증가함에 따라 휨탄성계수(彈性係數)는 증가하는 경향을 보여주었으며, 이러한 경향은 P.P망(網)플레이크를 혼합한 경우에도 동일하게 나타났다. P.P망(網)플레이크의 경우 망(網)플레이크의 면적이 커짐에 따라 휨탄성계수(彈性係數)는 증가하는 경향을 나타내었다. 4) 플레이크를 혼합한 보오드의 경우, 그 물리적(物理的), 기계적(機械的) 성질(性質)에 관여하는 주인자는 형상(形狀)으로 나타났으며, aspect ratio가 커짐에 따라 보오드의 성질(性質)이 향상되었다. P.P망(網)플레이크를 혼합한 보오드의 경우 주인자는 망(網)플레이크의 단면적으로, 단면적이 클수록 보오드의 성질(性質)을 개선(改善)시킬 수 있었다.

Keywords