대한기계학회논문집 (Transactions of the Korean Society of Mechanical Engineers)
- 제12권1호
- /
- Pages.163-172
- /
- 1988
- /
- 1225-5963(pISSN)
DOI QR Code
기하학적 적응제어에 의한 엔드밀링머시인의 안내면 오차 규명
Identification of guideway errors in the end milling machine using geometric adaptive control algorithm
- 발행 : 1988.01.01
초록
본 논문에서는 GAC방법을 이용하여 공작기계의 안내면오차를 수치제어 공작기계가 가지고 있는 가공조건의 조절 능력을 이용하여 가공오차를 보상제어 함으로써 규명(identification)할 수 있는 방법을 제시한다.
An off-line Geometric Adaptive Control Scheme is applied to the milling machine to identify its guideway errors. In the milling process, the workpiece fixed on the bed travels along the guideway while the tool and spindle system is fixed onto the machine. The scheme is based on the exponential smoothing of post-process measurements of relative machining errors due to the tool, workpiece and bed deflections. The guideway error identification system consists of a gap sensor, a, not necessarily accurate, straightedge, and the numerical control unit. Without a priori knowledge of the variations of the cutting parameters, the time-varying parameters are also estimated by an exponentially weighted recursive least squares method. Experimental results show that the guideway error is well identified within the range of RMS values of geometric error changes between machining passes disregarding the machining conditions.
키워드