대한토목학회논문집 (KSCE Journal of Civil and Environmental Engineering Research)
- 제7권2호
- /
- Pages.99-106
- /
- 1987
- /
- 1015-6348(pISSN)
- /
- 2799-9629(eISSN)
용접(鎔接) 강부재(鋼部材)의 피로균열성장(疲勞龜裂成長)에 대한 잔류응력특성(殘留應力特性)에 관한 연구(硏究)
Experimental Investigation of the Residual Stress on Fatigue Crack Growth of Welded Steel Members
- 투고 : 1987.04.27
- 발행 : 1987.06.30
초록
용접(鎔接) 강구조물(鋼構造物)의 피로균열성장거동(疲勞龜裂成長擧動)에 관(關)한 용접잔류응력(鎔擬殘留應力)의 거동(擧動)을 파악(把握)키 위하여 열처리(熱處理)를 실시(實施)하고 피로균열성장(疲勞龜裂成長) 및 검토(檢討)한 결과(結果) 용접부(鎔接部)는 경화(硬化)되어 늑성(勒性)이 감소(減少)되므로 소재부(素材部)보다 피로균열성장율(疲勞龜裂成長率)이 높았으며 이를 열처리(熱處理)한 결과(結果) 경도(硬度)나 저항력(抵抗力)이 증가(增加)되어 개선(改善)되었으며
Annealing were performed to investigate the behaviors of the residual stress remaining on the member of a steel structure. According to the fatigue test, the welding part has higher fatigue crack growth rate than the base metal part because the hardening of welding part reduce fracture toughness. However, the heat treatment decrease the hardness and increase the resistance to failure. Thus, the fatigue crack growth rate is improved and it reaches the minimum at
키워드