Journal of Korea Foundry Society (한국주조공학회지)
- Volume 6 Issue 1
- /
- Pages.27-35
- /
- 1986
- /
- 1598-706X(pISSN)
- /
- 2288-8381(eISSN)
A study on the computed aided gating design in gray cast iron
컴퓨터를 이용한 회주철의 탕구방안 설계에 관한 연구
Abstract
The gating design of gray cast iron was programmed in a Personal computer. By this program, casting test was done. The results obtained are as follows. 1. Gating design that can calculate the velocity of metal flow and size in each gate section by knowing the loss coefficient caused by friction loss and bend loss was programmed. 2. In the test casting, the gating ratio was changed into 1.1:1.3:1, 1:2:2, 1:4:4. And sound casting, free of sand washing defect, was obtained at the velocity of 35.5cm/sec in ingate.
Keywords