${\gamma}$-$Fe_2O_3$ 세라믹 가스감지소자;비표면이 가스감응성에 미치는 영향

Effect of Specific urface Area on the Gas Sensitive Properties

  • 신장욱 (서울공대 무기재료공학과) ;
  • 박순자 (서울공대 무기재료공학과)
  • 발행 : 1986.05.01

초록

This paper is concerned with a gas sensor composed of semi-conducting ${\gamma}$-$Fe_2O_3$ ceramics made by oxidizing $Fe_2O_3$ sintered body. Acicular $\alpha$-FeOOH powder prepared by precipitation of $FeSO_4$.$7H_2O$ solution was transformed to $FeSO_4$ sintered at 700$^{\circ}$-850$^{\circ}$C for 1 hr. and then oxidized to ${\gamma}$-$Fe_2O_3$ The gas sensitive properties of ${\gamma}$-$Fe_2O_3$ ceramic bodies based on the lectrical resistance change was measured in 0.5-2 vol% $H_2$ and $C_2$ $H_2$ gas at 35$0^{\circ}C$ The specific surface area of sintered specimen largely dependent on the sintering temperature and grain shape directly affected the gas sensitive pro-perties of ${\gamma}$-$Fe_2O_3$gas sensor. Specimens having larger specific surface area showed better sensitivity which means the electrical resistance change due to oxidation and reduction process occurs on ly at the surface of grains microscopically in the ${\gamma}$-$Fe_2O_3$ceramics. Micropores made in $Fe_2O_3$ powder during dehydration of $\alpha$-FeOOH can not prompt the gas sensitive properties of sintered ${\gamma}$-$Fe_2O_3$ because they are sintered or closed in the grains during sintering process and dose not affect the specific surface area of sintered body.

키워드

참고문헌

  1. Solid State Sci. v.125 no.10 Propane Gas Detector Using SnO₂Doped with Nb, V, Ti of Mo M. Nitta;S. Kanefusa;M. Haradome
  2. Appl. Phys. Lett. v.11 no.8 Activated Tungsten Oxide Gas Detectors P. J. Shaver
  3. Anal. Chem. v.34 no.11 Study on a Detector for Gaseous Components using Semiconductive Thin Films T. Seiyama;A. Kato;K. Fujishi;M. Nagatani
  4. IEEE Trans. Components, Hybrids and Manufacturing Tech. v.5 no.4 γ-Fe₂O₃Ceramic Gas Sensors Y. Nakatani;M. Matsuoka;Y. Iida
  5. Japn. J. Appl. Phys. v.22 no.2 Some Electrical Properties of γ-Fe₂O₃Ceramics Y. Nakatani;M. Matsuoka
  6. Proceedings on the International Meeting on Chemical Sensor The Influence of Additives on the Stabilization of SnO₂Gas Sensor's sensitivity Y. Matsuura;N. Murakami;K. Ihokura;T. Sciyama(ed.);K. Fueki(ed.);J. Shiokawa(ed.);S. Suzuki(ed.)
  7. J. Phys. Chem. Solids v.23 Conductivity in Iron Oxides D. S. Tannhause
  8. U.S. Patent, 4,241.019 Y. Nakatani
  9. 분체 및 분말야금 v.13 no.1 고용체의 시효 H. Imaoka
  10. 화학센서 T. Seiyama;J. Shiokawa;S. Suzuki;K. Hueki
  11. Ceramic Jpn. v.15 no.5 Ceramics for Gas and Humidity Sensors H. Mitsudo
  12. Am. Cer. Soc. Bull. v.54 TiO₂as an Air-to-Fuel Ratio Sensor for Automobile Exhausts T. Y. Tien(et al.)
  13. Bull. Chem. Soc. Jpan v.47 no.7 Conditions in the formation of Fe₃O₄by the Air Oxydation of Fe(OH)₂Suspensions M. Kiyama
  14. M.S. Thesis, S.N.U. 조성걸
  15. Commanications of Amer. Soc. Sintering of Acicular Fe₂O₃Powder T. Yamaguchi;H. Kosha
  16. J. Collid and Interface Sci. v.73 no.2 Micropore formation due to Thermal Decomposition of Acicular Microcrystals of γ-FeOOH N. Naono
  17. IEEE Trans. on Mag. v.15 no.3 Influence of Reduction Temperature on Coercivities, Coercivity Factors and Rheological Properties of γ-Fe₂O₃and Silica Doped γ-Fe₂O₃ A. R. Corradi
  18. Acta. Cryst. v.13 Morphology of Synthetic Submicroscopic Crystals of α-and γ-FeOOH and of γ-Fe₂O₃Prepared from FeOOH G. W. van Oosterhovt