금속유물의 부식화합물(I)-철제유물을 중심으로

This report described the corrosion structure of excavated iron artifacts in terms of simple model based on the knowledge of the corrosion process. (Fig.1)(Table 1,2)In storing the objects, there are basically three ways in which they either break in wedges, flakes and dish-shaped flakes. Completely mineralized objects or those with only a small iron core tend to break into wedges and more solid objects either split small dish-shaped flakes or large flat ones.(Fig. 2,3,4)There are two ways, therefore, to prevent this from happening. One is to keep the artifacts rigorously dried in Silica-gel, never allowing the relative humidity to rise. This is feasible which the artifacts are in store but causes great difficulty if they are wanted for museum display. Because they still contain $ FeCl _2$ they are always at risk ; they contain the seeds of their own destruction. The other alternative is to use of washing process to dissolve out the $ FeCl _2$. In this connection, many different methods to stabilize the artifact have been employed; boiling iron in frequent changes of water, soaking in Na-sesquicarbonate solution, soaking in alkaline Na-sulphite solution. In this report, introduced the alkaline sulphite method by the N.A. North and C.Pearson.Finally, Let me extend my thanks to Ancient Monument Lab., Museum of London Conservation Lab., British Museum Conservation Div. and National Maritime Museum Conservation Lab. who have helped me and made many valuable suggestions.