A Study of Centrifugal Force for Operation of Casting - specially in partial denture -

주조시(鑄造時) 작용(作用)되는 원심력(遠心力)에 관(關)한 연구(硏究) - 국부의치(局部義齒)를 중심(中心)으로 -

  • Kim, Boo-Seob (Department of Dental Laboratory Technology, Jisan Junior College)
  • 김부섭 (지산간호보건전문대학 치기공과)
  • Published : 1985.06.01

Abstract

This experimental study is perform to study the effect of the direction for the centrifugal force in operating centrifugal casting machine. In order to investigate the effect of direction for centrifugal force action on the casting ability 20 pieces of specimen are produced including one vertical direction and four horizontal directions. Casting shows us that the 15 pieces of specimen among them are included within $\pm$16. The results obtained through the comparison with 5 groups of the casting ability are as follows: 1. In the experiment of the casting, statistically significant difference are found between the vertical direction and the group of horizontal direction, namely, the direction of 3, 6, 9 and 12 o'clock, and also statistically there are significant differences between the direction of 9 o'clock and of 6 o'clock, and between the direction of 9 o'clock and of 12 o'clock which lie between the groups of horizontal directions. 2. The degree of casting ability is showing us on an average, 23.80 in the vertical direction. And also in the group of horizontal direction it prove in turn 15.60 in the direction of 9 o'clock, 14.47 of 3 o'clock, 13.30 of 12 o'clock, and 12.80 of 6 o'clock.

Keywords