Korean Journal of Agricultural Science (농업과학연구)
- Volume 12 Issue 1
- /
- Pages.75-85
- /
- 1985
- /
- 2466-2402(pISSN)
- /
- 2466-2410(eISSN)
The Influence of Admixture of Lignosulfonic Acid Type on the Strength of Mortar
Lignosulfonic Acid계(系) 감수제(減水劑)가 모르터의 강도(强度)에 미치는 영향(影響)
- Kim, Han Young (Graduate School, Chungnam Natl. Univ.) ;
- Kim, Seong Wan (Dept. of Agricultural Engineering, Coll. of Agriculture, Chungnam Natl. Univ.)
- Published : 1985.06.30
Abstract
This study is intended to find out the influence of Lignosulfonic Acid Type Admixture on compressive, tensile, flexural strength and dispersing action of mortar, and fixation of by-product of pulp industry. 1. The more Pozzolith-84 is added, the larger flow value is. The admixture of lignosulfonic acid type adhere to cement particles and the surface potential of particles is generated. On account of the repulsion among the cement particles, they are dispersed and the mortar get workable, so the production cost of precast product is curtailed and the amount of cement is reduced in a certain workability of mortar. 2. The strength of mortar is greater than plain mortar when P/C added is 0.2 and 0.4%. As time passed the potential energy is reduced and the distance of particles which lignosulfonic acid adhered to get near according as the amount of adhesion is increased. The setting and hardening reaction of morter is occurred in close state, so the strength of mortar is increased a little. The strength of mortar is less than plain mortar when amount P/C added is 0.8%. Pozzolith-84 is mainly composed of lignosulfonic acid and lignin does not influence the hardening of mortar, therefore the remained
본(本) 연구(硏究)는 Lignosulfonic Acid계(系) 감수제(減水劑)를 첨가(添加)한 모르터의 유동성(流動性) 개선(改善)과 강도변화(强度變化)를 구명(究明)하고자 시행(施行)하였다. 1. Plastic 상태(狀態)에서 Pozzolith-84의 첨가량(添加量)을 늘리면 Flow가 증가(增加)하였다. 이는 Pozzolith-84의 첨가(添加) 시(時) 전기적(電氣的) 이중층(二重層)이 형성(形成)되어 시멘트 입자(粒子) 상호간(相互間)에 반발력(反撥力)이 생겨 분산(分散)된 것으로 이 분산작용(分散作用)은 술폰산기(酸基)의 계면활성작용(界面活性作用)에 기인(基因)되며, 시공성(施工性)이 개선(改善)됨에 따라 Precast 제품(製品) 생산(生産) 시(時) 비용절감(費用節減)의 효과(效果)가 있으며, 단위수량감소(單位水量減少)에 의(依)해 구조물(構造物)의 내구성(耐久性)이 개선(改善)된다. 2. 경화(硬化)된 상태(狀態)에서는 P/C가 0.2, 0.4%일 때 보통(普通)모르터의 강도(强度)보다 다소증가(多少增加)되었으며, P/C가 0.8% 이상(以上)일 때 보통(普通) 모르터의 강도(强度) 보다 감소(減少)된 것은 잔류(殘留) 술폰산(酸)(
Keywords