농업과학연구 (Korean Journal of Agricultural Science)
- 제11권2호
- /
- Pages.284-294
- /
- 1984
- /
- 2466-2402(pISSN)
- /
- 2466-2410(eISSN)
동력분무기용(動力噴霧機用) 삼분두(三噴頭)의 살포도(撒布度) 개선(改善)에 관(關)한 연구(硏究)
Study on the Improvement of Distribution Pattern in the Triple Nozzle System
- Hong, Soung Wha (Graduate School, Chungnam Natl. Univ.) ;
- Lee, Sang Woo (Dept. of Agricultural Machinery Engineering, Coll. of Agriculture, Chungnam Natl. Univ.)
- 발행 : 1984.12.31
초록
동력분무기용(動力噴霧機用) 3분두(噴頭) 분공(噴孔)의 크기, 살포각도(撒布角度) 및 와실(渦室)의 간격을 변화(變化)시키면서 최대(最大) 분무유효거리(噴霧有效距離)의 구명(究明)과 살포도(撒布度)의 개선(改善)을 위(爲)한 분두배열(噴頭配列) 방법(方法)의 분석결과(分析結果)는 다음과 같다. 1. 분공(噴孔) 직경(直徑)이 커짐에 따라 분무량(噴霧量)은 증가(增加)하였고 1번구(番口)는 2차(次) 곡선(曲線)으로 II번구(番口), III번구(番口)는 1차(次) 함수관계(關係)를 나타냈다. 2. 최대(最大) 유효거리(有效距離)는 살포각도(撒布角度)가
Effects of orifice diameter, operating angle and swirl chamber distance were examined to study a reasonable distribution pattern on the maximum available travel distance in the triple nozzle system. The results of the study were as follows; 1. Discharge rate was increased with increase of orifice diameter, and a quadratic line for the 1st nozzle and linear lines for the 2nd or the 3rd nozzle. 2. The operating angle of
키워드