Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지

The Effect of Initial Partial Pressure of Nitrogen on the Manufacturing of Reaction-Bonded Silicon Nitride

반응결합 질화규소의 제조의 있어서 초기 질소분압의 영향

  • 이근예 (한국과학기술원 정밀요업재료연구실) ;
  • 이준근 (한국과학기술원 정밀 요업재료연구실) ;
  • 오재희 (인하대학교 무기재료공학과)
  • Published : 1984.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper mechanical properties of reaction-bonded silicon nitride are studied with the variation of initial nitrogen partial pressure. At 1, 25$0^{\circ}C$ the amount of nitridation and the nucleation of nitride increase linearly with the nitrogen partial pressure increase. After the nitridation is completed the density of nitride and modulus of rupture at room temperature are increased with the amount of nitridation. When the partial pressure of nitrogen is 0.5 atm the specimen show the optimum properties that is the highest density of nitride and modulus of rupture. Also the microstructure of $\alpha$-matte is deveoped very well at that pressure of nitrogen which contributes to the strength development of specimen. It is shown that with proper control of initial partial pressure of nitrogen high strength silicon nitride body can be manufactured for dynamic applications.

Keywords

References

  1. Ceram. Bull. v.62 no.4 Strength and Fracture Toughness of Reaction-Bonded Si₃N₄ Stephen C. Danforth;Harc H. Richman
  2. Ceram. Bull. v.58 no.12 Densification of Reaction-Bonded Silicon Nitride John A. Mangles;Gerald J. Tennenhouse
  3. Ceram. Bull. v.60 no.12 Sintering Behavior and Microstructural Development of Ytrrium-Doped Reaction-Bonded Silicon Nitride Idem.
  4. Ceram. Bull. v.60 no.6 Effect of Rate-Controlled Nitriding and Nitriding Atmospheres on the Formation of Reaction-Bonded Si₃N₄ John A. Mangles
  5. J. Mater. Sci. v.14 Review; Reaction-Bonded Silicon Nitride A. J. Moulson
  6. J. Mater. Sci. v.10 Strength, Density, Nitrogen Weight, Gain Relationships fro Reaction Sintered Silicon Nitride B. F. Jones;M. W. Lindley
  7. J. Mater. Sci. v.9 A Mrechanism for the Nitridation of Silicon Powder Compacts A. Atkinson;P. J. Leatt;A. J. Moulson;E. W. Roberts
  8. J. Mater. Sci. v.11 Structure, Formation Mrechanisms and kinetics of Reaction-Bonded Silicon Nitride H. M. Jennings;M. H. Richman
  9. Soviet Phy. Crystallography v.16 no.5 Growth Mechanism of Silicon Nitride Whiskers V. N. Gribkov;V. A. Silaev;B. V. Schetanov;L. Umantsev;A. S. Isaikin
  10. Trans. Brit. Ceram. Soc. v.73 Temperature Gradient in Nitriding Silcon Powder compact A. Atkinson;A. D. Evans
  11. Ceram. Bull. v.57 no.5 Procedure for Fabrication of Si₃N₄ by Rate-Controlled Reaction Sintering Philip Wong;Donald R. Messier
  12. Transactions of the Metallugical Society of AIME v.215 no.10 High Temperature Themodynamics of the Silicon, Nitrogen, Silicon-Nitride System R. D. PehIke;J. F. Elliott
  13. J. Mater. Sci. v.14 The Influence of Hydrogen in the Nitriding gas on the Strength, Structure and composition of Reaction-Sintered Silicon Nitride M. W. Lindley;D. P. Elias;B. F. Jones;K. C. Pitman
  14. J. Mater. Sci. v.16 The Role of Hydrogen in the nitridation of Silicon powder compacts H. Dervisbegovis;F. L. Riley
  15. J. Am. Ceram. Soc. v.58 no.7-8 Effect of H₂-N₂ Nitriding Atmospheres on the Properties of Reaction-sintered Si₃N₄ John A. Mangles
  16. J. Mater. Sci. v.13 A Mechanism for the Nitridation of Fe-Contaminated Silicon S. M. Boyer;A. J. Moulson
  17. Acta. Met. v.2 The Influence of Microstructure on the Strength of Reaction Bonded Silicon Nitride(RBSN) S. C. Danforth;H. M. Jennings;M. H. Richman
  18. J. Am. Ceram. Soc. v.59 no.7-8 Nitridation of High-Purity Silicon A. Atkinson;A. J. Moulson;E. W. Roberts
  19. J. Mater. Sic. v.10 Nitridation of High-purity Silicon idem
  20. 요업학회지 v.19 no.2 Si₃N₄ 결합 SiC 내화재료에 있어서 생성된 Si₃N₄의 미구조변화 최덕균;이준근
  21. J. Mater. Sci. v.12 The Development of Strength in Reaction Sintered Silicon Nitride B. F. Jones;K. C. Pitman;M. W. Lindley
  22. Ceram. Bull. v.56 no.9 Determination of Phase Content of Si₃N₄ by X-ray Diffraction Analysis C. P. Gazzara;D. R. Messier