평면 응력 Bore Expanding 에 있어서의 평면이방성 의 영향

The Effect of Planar Anisotropy in Plane-Stress Bore Expanding

본 연구에서는 반경 방항으로 균일하게 잡아당기는 문제에 대하여 등방성, 직 교 이방경, 평면 이방성의 해를 비교하고, 성형성에 중요한 의미를 갖는 두께방항 변 형도와 원주방항 응력의 분포에 대하여 해석한다. 또 냉간 압연된 철판을 사용하여 평저 펀치(flat punch)에 의한 스트레칭(stretching) 실험을 하고, 실험과 같은 경계 조건으로 시뮬레이션(simulation)하여 결과를 비교한다.

The matrix method, as an effective FEM formulation for the analysis of rigid-plastic deformation, was applied to the bore expanding of anisotropic sheet metal. The effect of planar anisotropy on sheet metal deformation was studied for bore expanding process under the uniform radial stretching condition, and the results were compared with isotropic and normal anisotropic solutions. Experiments were carried out using a flat punch for cold-rolled sheet metal. The experimental results were compared with computations from the matrix method with the boundary conditions corresponding to actual experiment. Both in theory and experiment, it is found that the maximum thinning which results in necking occurs in the direction of the minimum R-value. The results also suggest that the matrix method is efficient for analyzing planar anisotropic sheet metal. The comparison between theory and experiment suggests that Hill's theory of planar anisotropy is somewhat exaggerated. However, the theoretical predictions are in qualitative agreement with the experimental results.