A Study on the Solidified Structures of Al-Pb Alloy Solidified by Rapid Cooling

급냉응고 시킨 Al-Pb 합금의 응고조직에 관한 연구

  • Kim, Yong-Kil (College of Engineering, Seoul National University) ;
  • Kim, Tong-Hoon (College of Engineering, Seoul National University)
  • Published : 1982.03.31

Abstract

The present investigation was made to abtain a fine distribution of Pb Particles in AL - Pb binary alloys , which have a broad miscibility gap and large specific difference, by means of rapid Cooling of the molten alloys. Al-2.4% Pb, Al-5.5wt% Pb and Al-8.0wt % Pb alloy were used. The rapid cooling operation was performed by free falling of homogeneous liquid Al-Ph alloys into the water-cooled copper mold, and thermal analysis was made. Microstructures were observed, and variations of size and number of Pb particles were analysicle analyzer. By the result of examination with the varing cooling rates 100 to $210^{\circ}C/sec$ fine distributions of Pb particles were obtained with high cooling rate. Under same cooling condition, the best rapid cooling effect was recognized in Al-5.5wt% Pb alloy.

Keywords