The Variation in Needle Characteristics of Natural Population of Abies koreana Wilson

구상나무 천연집단(天然集団)의 침엽형질(針葉形質) 변이(變異)

  • Lee, Kang Young (College of Agriculture, Gyeongsang National University) ;
  • Kim, Hyun Kwon (College of Agriculture, Gyeongsang National University)
  • Received : 1982.08.05
  • Published : 1982.09.30

Abstract

These studies were carried out to know the variation of needle characteristics of Abies Koreana distributed in Korea. The results are summarized as follows. The differences of needle length and number of stomata row among the population were shown one percent level, but not in each individual tree. Correlations coefficients between the D.B.H. and needle length or needle width of mother trees were not correlated all populations respectively. It was found that correlation coefficient between needle length and needle width was positive in two populations. of Mt. Doukyou and Mt. Hanla, but it was not in Mt Jiri. Correlation coefficient between needle length and the number of stomata row positive correlation in Mt. Doukyou. Correlation coefficient between needle width and the number of stomata row was shown positive in all populations, but it was not that correlation coefficient between needle width and density of serrations, and between number of stomata row and density of serrations. The coefficients of variations were shown higher density of serration than needle length, needle width and stomata row.

우리 나라의 지리산(智異山), 덕유산(德裕山), 한라산(漢拏山)에 천연분포(天然分布)되어 있는 구상나무 집단(集團)의 침엽형질변이(針葉形質變異)를 구명(究明)하기 위하여 집단별(集團別), 집단내(集團內)의 개체별(個體別)로 조사(調査)하였던 바 그 결과(結果)를 요약(要約)하면 다음과 같다. 침엽장(針葉長), 기공열수(氣孔列數)에 있어서는 집단간(集團間)에 1%의 유의성(有意性)이 인정(認定)되었으며 집단내(集團內)의 개체간(個體間)에는 형질(形質) 모두 유의성(有意性)을 인정(認定)할 수 없었다. 모수(母樹)의 흉고직경(胸高直徑)과 침엽장(針葉長), 침엽폭(針葉幅) 간(間)에 있어서는 집단(集團) 모두 상관(相關)이 없었다. 침엽장(針葉長)과 침엽폭(針葉幅) 간(間)에서 덕유산(德裕山)과 한라산(漢拏山) 집단(集團)은 정(正)의 상관(相關)을 보였으나 지리산(智異山) 집단(集團)은 상관(相關)이 없었으며 침엽장(針葉長)과 기공열수(氣孔列數) 간(間)에서는 덕유산(德裕山) 집단(集團)이 정(正)의 상관(相關)을 보였다. 침엽폭(針葉幅)과 기공열수(氣孔列數) 간(間)에는 집단(集團) 모두 정(正)의 상관(相關)을 보였으나 침엽폭(針葉幅)과 거치밀도(鋸齒密度) 그리고 기공열수(氣孔列數)와 거치밀도(鋸齒密度) 간(間)에는 상관(相關)이 없었다. 거치밀도(鋸齒密度)의 변이계수(變異係數)는 다른 형질(形質)에 비(比)해 큰 경향(傾向)을 나타내었다.

Keywords